Show me your Challenger nitrous installs!

Discussion in 'SRT Hellcat Performance' started by YLWJKT, Jan 24, 2016.

  1. YLWJKT

    YLWJKT Silver Member

    Joined:
    Oct 12, 2015
    Messages:
    380
    Likes Received:
    129
    Trophy Points:
    153
    Vehicle:
    Challenger SRT Hellcat
    I'm specifically looking for how you have your bottle/bottles mounted, where you put your blow down tube, how your wiring is set up and how you ran your line; inside or outside of the car?
    Thanks!
     
    • Agree Agree x 1
  2. rubbel

    rubbel Gold Member

    Joined:
    Jan 28, 2015
    Messages:
    167
    Likes Received:
    86
    Trophy Points:
    278
    Location:
    Wimauma, FL
    Vehicle:
    Charger SRT Hellcat
    Probably no help if your installing in an oem car but here is how I mounted dual nitrous bottles. The blowoff are in front of bottles and exit to outside of car via -8AN straight bulkhead fittings. :)

    [​IMG]

    Here is where my nitrous, fuel and purge solenoid wires exit thru a rubber grommet on a custom made aluminum plate thru the firewall. All hoses are inside the car parallel to the transmission tunnel on the passenger side.

    [​IMG]

    Here are two options for wiring my nitrous controller. The first is a Leash that runs two stages and 2 purges.

    [​IMG]

    This one is a Lingenfelder single stage progressive setup that utilizes a cold box.

    [​IMG]
     

Share This Page

Search tags for this page

hellcat nitrous