Speedlogix Matrix Subframe Connectors 08-16 Challenger

Discussion in 'Speedlogix' started by Speedlogix Sales, May 27, 2016.

  1. Speedlogix Sales

    Speedlogix Sales Gold Member Hellcat Supporting Vendor

    Joined:
    Apr 7, 2015
    Messages:
    1,076
    Likes Received:
    336
    Trophy Points:
    218
    Location:
    West Palm Beach, FL
    Vehicle:
    Challenger SRT 392
    If you are looking to tighten up your Challengers Suspension these are for you!

    [​IMG]

    These true full-length connectors run the entire length of the floor pan for increased chassis rigidity, better handling and improved ride. We use round chrome-moly tubing and these sub-frame connectors are designed to have no ground clearance issues.

    We spent countless hours figuring out where the LX cars could benefit most from chassis stiffening. Here is the end result....Made from 4130 Chrome Moly material this brace is specifically designed for the LC Chassis cars. It ties together the inner/outer frame rails and the rear lower control arm mount. Braces are bare metal but can be powdercoated or painted for a long lasting finish. These Must welded in for installation for maximum benefit from this brace.

    These are perfect for serious cars with high horsepower, sticky tires or competition suspension.

    * These tuck in very close to the underside of the chassis and hang only as low as the side skirts of the Challenger

    Razors Edge Matrix Brace Subframe Connectors 08-16 Challenger

    Any questions, just let us know!
    Chris
     
  2. Speedlogix Sales

    Speedlogix Sales Gold Member Hellcat Supporting Vendor

    Joined:
    Apr 7, 2015
    Messages:
    1,076
    Likes Received:
    336
    Trophy Points:
    218
    Location:
    West Palm Beach, FL
    Vehicle:
    Challenger SRT 392
    Add some subframe connectors today!

    -Chris
     

Share This Page