Today at Atlanta drag way

Discussion in 'SRT Hellcat Racing Forum' started by Georgia cat, Aug 29, 2015.

  1. Georgia cat

    Georgia cat Gold Member

    Joined:
    Feb 10, 2015
    Messages:
    141
    Likes Received:
    109
    Trophy Points:
    293
    Vehicle:
    Challenger SRT Hellcat
    We were testing today with the Metco .250 pulley.
    DA was approximately 2600ft with temp. In the low 80's
    MT drag radials on factory wheels
    Alum.drive shaft
    E85 tune

    60'-1.66
    330'-4.52
    1/8-6.79
    Mph-108.53
    1000'-8.744
    1/4-10.400
    Mph-135.71

    We had one pass at 136.04 but spun the tires,had another pass at 10.421@134.26 with a1.557 -60'.I ordered fresh tires today,unfortunately we can't get the new MT compound in 20"
    For anyone interested,I highly recommend Aric at Injected Engineering.
    I feel like there is more left in this setup with a few adjustments,I will keep everyone up to date as we go.
     
    • Like Like x 1
  2. hellcat1

    hellcat1 Gold Member

    Joined:
    Sep 27, 2014
    Messages:
    10,668
    Likes Received:
    2,026
    Trophy Points:
    778
    Location:
    Michigan
    Vehicle:
    Challenger SRT Hellcat
    Who did you have change out your pulley.....and what intake are you using
     
  3. Georgia cat

    Georgia cat Gold Member

    Joined:
    Feb 10, 2015
    Messages:
    141
    Likes Received:
    109
    Trophy Points:
    293
    Vehicle:
    Challenger SRT Hellcat
    Aric Carrian at Injected Engineering,he has done all the work on my car.
    We are still using the oem intake with KN drop in filter,but are looking in to other options
    Injected Engineering is located in Kennesaw Ga.678-449-6871
     
    • Useful Useful x 1
  4. mowe

    mowe Gold Member

    Joined:
    Mar 25, 2015
    Messages:
    371
    Likes Received:
    195
    Trophy Points:
    293
    Vehicle:
    Challenger SRT Hellcat
    Great job !
     

Share This Page