ZL1 Add Ons Front Splash Guard Modification

Discussion in 'Dodge Charger SRT Hellcat' started by YLWJKT, May 30, 2016.

  1. YLWJKT

    YLWJKT Silver Member

    Joined:
    Oct 12, 2015
    Messages:
    379
    Likes Received:
    127
    Trophy Points:
    153
    Vehicle:
    Challenger SRT Hellcat
    So I wasn't overly thrilled with the idea of putting the front guard OVER the 2 middle push pins.
    This afternoon I took a piece of paper and made a template.

    [​IMG]


    Next I drilled 2 corresponding holes into the splash guard for the push pins to pass through.

    [​IMG]



    Here's the finished product with all 4 push pins holding it on. (picture shows the 3 bottom push pins only)

    [​IMG]


    A bit of advice; the push pins are not all the same size.
    Pay attention to what hole they came out of to avoid any issues.
     
    • Like Like x 1
  2. speedycat

    speedycat VIP Hellcat Member

    Joined:
    May 11, 2016
    Messages:
    228
    Likes Received:
    70
    Trophy Points:
    98
    Location:
    Texas
    Vehicle:
    Charger SRT Hellcat
    Thanks for the tip. This should be the way they come.
     
  3. Code3100

    Code3100 Silver Member Hellcat Car Club

    Joined:
    Sep 6, 2015
    Messages:
    201
    Likes Received:
    70
    Trophy Points:
    178
    Vehicle:
    Charger SRT Hellcat
    I just put it over them, looks fine IMO.
     

Share This Page