SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

Forum Discussions about this Product

    1. · Registered
      Challenger SRT Hellcat
      Joined
      ·
      192 Posts
      Discussion Starter · #1 ·
      DSS states on their website " This set of axles has only one problem, they do not come with the ABS / Tone rings on them, but are machined for you to easily transfer over the rings from your stock axles." Saw a video where someone mentioned to be extremely careful as you can't order ABS tone rings for the Hellcat, you'd need another OEM axle.

      Is it true there is no where to order OEM ABS tone rings? Found these..wondering if they'd work. Would prefer to just put on new rings vs. mess with swapping.
       
    2. · Registered
      2019 Charger Hellcat
      Joined
      ·
      375 Posts
      DSS states on their website " This set of axles has only one problem, they do not come with the ABS / Tone rings on them, but are machined for you to easily transfer over the rings from your stock axles." Saw a video where someone mentioned to be extremely careful as you can't order ABS tone rings for the Hellcat, you'd need another OEM axle.

      Is it true there is no where to order OEM ABS tone rings? Found these..wondering if they'd work. Would prefer to just put on new rings vs. mess with swapping.
      When I installed GForce Renegade axles into a customers Redeye, they did not have the ABS rings either. Swapped them over from the OEM ones with no issue. Quick and easy. Just have to use a small punch and hammer and tap it off while working your way around the axle. Install to the aftermarket axles will be much easier, just lightly tap it on while working your way around the axle until it bottoms out.


      Sent from my iPhone using Tapatalk
       
    3. · Registered
      Challenger SRT Hellcat
      Joined
      ·
      192 Posts
      Discussion Starter · #21 ·
      Glad to hear your back up and running. What was the issue with the aftermarket tone rings? I ask as my stock ones have been off and on 3 times now and was going to purchase a pair of these for my spare axles verse swapping them every time. What did they cost per pair and who’s did you use HHP?
      Thanks mate. These were the aftermarket tone rings purchased. 'DIY Solutions' is the manufacturer. $26.95+Shipping.

      I noticed they were a much tighter fit than OEM. To the point you'd probably be best with a press setup of some kind. Used the old ring to help seat. Rubber mallet wasn't really doing the job on the ring itself..bent the first one. Took quite a bit of finesse to say the least. OEM went on the other axle like butter.
       

Forum Reviews

Be the first to review this product

Write a Review

Do you have experience with this item? Help our community members and share your knowledge.

Sign in to add review

Top