SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

4 piston Super Stock style brake conversion parts for '21 RE's

2621 Views 15 Replies 4 Participants Last post by  dossey
NOTE: The knuckles are sold. Rather than create unneeded confusion I'll let this thread go and start another one with just the calipers and rotors listed.

I have everything needed to remove the large '21 RE brake rotors and replace with the same brakes that a '20 SS comes stock with. I bought this stuff for the '21 REWB that I owned earlier in the year. The pieces were bought new from Steve White, installed on the car and driven maybe a couple hundred miles. I then decided to sell the car(for good money, Thanks and ordered a Super Stock. I removed these items before selling the car.
Included is everything needed to put the SS brakes on a Redeye. This will allow use of pretty much any 17" or 18" front skinny for drag racing.
Parts included are: Red calipers, brake rotors, knuckles, brake pads and miscellaneous small hardware.
NOTE: At the time I ordered these parts there were only two calipers in the system. When they arrived they had some paint chipping on both of them. Since they were the only ones available I took them anyway. They are functionally as good as new but DO HAVE SOME COSMETIC IMPERFECTIONS. I do not want any misunderstandings regarding this.
Also, I am told that the Torred spot paint pen works well for covering chips on the red calipers. I did not try this because the chips really didn't bother me much.
I paid over $2400 for this stuff. I'll take $1500 for it all, you pay for shipping and any CC fees that might apply.

Paint chips:
  • Like
Reactions: 2
1 - 6 of 16 Posts
I would say these are more for using 17" front skinnies. Most 18" wheels fit the factory brakes for hellcats.
Not a '21, they have 15.7" rotors and there are no 18" wheels that will fit over them.
Would you sell just the knuckles?
No. Thanks for asking though.
  • Like
Reactions: 1
I own a 2020 redeye widebody challenger. If i wanted to buy some demon wheels would this work?
Yes. This is the same size setup as the Demon.
It sounds like he needs the brakes and I need the knuckles 😁
LOL. I'll let you two work that out if you want.
I'd be happy to split it as long as it all sells.
  • Like
Reactions: 1
Chillx - Yes, on a '20 and older all that would be needed is the rotors, calipers, pads and hardware.
The swap out is pretty straightforward. It would probably take you longer to bleed the brakes than to swap out the parts.
And all of these parts have maybe 200 miles on them.

dossey - I guess if you two want this stuff all that's left is for y'all to figure out the split.

Fwiw - I have good boxes to ship all this stuff in so it'll arrive in good condition.

GreenMachine - I have 18x5 skinnies in Weld, Billet Specialties and Forgestar. None of them would fit my '21 REWB because they hit the cailipers. The B.S. and the Forgestars both went right on my '19 REWB.
  • Like
Reactions: 1
1 - 6 of 16 Posts