SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

AAD Performance Adjustable Rear Toe Link Help

2000 Views 5 Replies 5 Participants Last post by  xxdirtyjoexx
Ok so a little help would be greatly appreciated. Installing the AAD Performance Drag Pak, and nearly finished with the rear. I’m stuck, however, with the inboard bolt in the cradle. Got the nut off fine but I can’t get the bolt to come out to remove the stock toe link. Any ideas or suggestions?

thanks in advance.
578962
See less See more
1 - 1 of 6 Posts
I ended up cutting that bolt out when I did it. Thinking loosening and dropping the cradle may have been easier. Those bolts are extremely hard.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top