SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

(another) Crank Bolt Question

6824 Views 6 Replies 7 Participants Last post by  TrackDay
Lord knows how many times this has been discussed, so I'll be brief as I was hoping for clarification

I've got an '18 HC and I'm going to pin the crank. There was talk about upgrading the bolt to the one used on the Demon however I read that at a certain model year they started using the Demon bolt on all HCs?

I'm using the Bwoody kit which comes with (I assume) the stock HC bolt however I also purchased the Demon bolt. Does it matter which I use?

Thanks in advance
1 - 1 of 7 Posts
Demon and 2018 + ones have a torque to yield bold. Only takes somewhere around 150 ftlbs and then you continue a certain amount of direction.

The old bolts are 249 ftlbs I believe.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.