[1FSTCAT]

Still looking and can't find any?

Not looking for other solutions, I'm aware of the paint seals and protectors, but I actually prefer splash guards.

 

[Jim Hetrick]

I have seen a tread on here, I think it was APRIL77 that had them installed on her car but I may be wrong. There is a thread I think the title was something like dealer installed today or something with dealer in the title and there was pictures of them installed.

 

[april77]

Hey Zixxer,

I have the Mopar mudflaps. Here is the thread link:

How Many Dodge Dealers are in the USA SRT Hellcat Forum

April

 

[Jim Hetrick]

Thanks April, glad I remembered your pictures

 

[1FSTCAT]

April, Many thanks and do you have part numbers? I ask as all the listing on eBay and such say "DOES NOT FIT HELLCAT"

 

[Jim Hetrick]

April, Many thanks and do you have part numbers? I ask as all the listing on eBay and such say "DOES NOT FIT HELLCAT"

Thanks Zixxer, I'll try and help next time

 

[gts_2001]

Something to consider, if and when the Mud Flaps become available for the Hellcat:

I had MOPAR Mud Flaps dealer installed on my 2008 SRT Challenger. I was advised by the installer that he had placed some sort of "waxed" kraft paper between the Mud Flap and the rim of the fender at the wheel wells. The reason was to prevent the Mud Flaps from rubbing the paint off of the rim during normal torsional movement. After nearly 7 years, no damage to the paint! Had he not suggested that, I would never have considered it. I will do the same when I have Mud Flaps installed on the Hellcat.

 

[magnummrk]

April, Many thanks and do you have part numbers? I ask as all the listing on eBay and such say "DOES NOT FIT HELLCAT"

Looking for the part #'s also. I had some on my 12. They were Mopar and they were kind of molded, hopefully it is a similar design.

 

[1FSTCAT]

Thanks Zixxer, I'll try and help next time

You did help, many thanks.

 

[Jim Hetrick]

I have seen a tread on here, I think it was APRIL77 that had them installed on her car but I may be wrong. There is a thread I think the title was something like dealer installed today or something with dealer in the title and there was pictures of them installed.

Part # 82214141 82214142 119.00 on ebay from Dodge dealer fits 2015, can I get you anything else before I go on my break. LOL

 

[1FSTCAT]

Something to consider, if and when the Mud Flaps become available for the Hellcat:

I had MOPAR Mud Flaps dealer installed on my 2008 SRT Challenger. I was advised by the installer that he had placed some sort of "waxed" kraft paper between the Mud Flap and the rim of the fender at the wheel wells. The reason was to prevent the Mud Flaps from rubbing the paint off of the rim during normal torsional movement. After nearly 7 years, no damage to the paint! Had he not suggested that, I would never have considered it. I will do the same when I have Mud Flaps installed on the Hellcat.

Yep, I always either put the clear protective barrier or cut my own black vinyl. Many flaps come with the stuff pre cut, not sure if Mopar does as I always used the stealth splash guards in the past.

 

[1FSTCAT]

PART # 82214141 & 82214142

FITS 2015 DODGE CHALLENGER (EXCLUDES ALL HELLCAT MODELS)

the above statement concerns me...I hope those are what April has so the warning is not accurate???

 

[1FSTCAT]

Part # 82214141 82214142 119.00 on ebay from Dodge dealer fits 2015, can I get you anything else before I go on my break. LOL

Jim, Yes, see above and let's step up the response time...I can't keep checking on these threads every minute <<<<< That's all humor....I do appreciate everything you and others do on this board to get us all through the little things.

 

[Jim Hetrick]

go to ebay put in one of those numbers and two auction will come up both Dodge dealers, both say for 2015 Challenger hellcat, I'll be over to put them on for you also. LMAO

 

[magnummrk]

Dodge Challenger Set of Front Rear Molded Splash Guards Mopar eBay

I just called the dealer and they are $130 from them

 

[1FSTCAT]

go to ebay put in one of those numbers and two auction will come up both Dodge dealers, both say for 2015 Challenger hellcat, I'll be over to put them on for you also. LMAO

Sweet, I'll get these on order ASAP...if you could get by this weekend...that works best for me...might even throw in a nice meal with beverage of choice. Please bring some white gloves, sort of particular about finish

 

[1FSTCAT]

BTW - you all jumped right past the posting with the (DOES NOT FIT HELLCATS) - that's really the question. I've found the listings on eBay, they just all say they don't work on the Hellcats...even SteveWhite Motors...they are good on the details. So I'm still back to the confirmation of those numbers actually working on our cars...I personally don't see why not, but I also recall our fenders are rolled so perhaps there is a difference???

 

[april77]

These are the mud flaps that I had installed on Dante, on the Mopar website: 2015 Dodge Challenger - Exterior Accessories Mopar

Part numbers are: 82214141 and 82214142 they are $65 each, $130 for all. Then I paid the labor for installing them, obviously. I was not going to be the one to drill holes in Dante! LOL!

April

 

[Jim Hetrick]

Just bought a shifter from Steve White that said 2009-2014, he said doesn't work for 2015. It works and is correct for our cars.The two dealers on ebay state they fit Hellcats.

 

[1FSTCAT]

Thanks April, Jim is really no help at all... until he installs them. Thanks everyone, flaps are on order and no problem drilling a hole...I'd actually rather do it myself and know I'll be careful enough to not damage the car. They might fix it, but I actually don't want any dealers fixing my cars....I've had so many bad paint stories that I'll never have them touch my car. Now pro collision in Stafford and Woodbridge...they can paint my cars anytime...great folks.