[Reaperhwk]

Putting badges back on after PPF. Shop didn’t do it and I need a location. Searched online I get some posts about narrow body but I wanted to be sure the WB are the same. They may be different because of the flares.
Can someone give me these measurements to the nearest 1/8”? The picture below I Just got off the internet but wanted to show which areas I need a measurement of. Also, if you put a level like I did below on the hellcat ears are they level? With this info I can easily get them back on. Hopefully help others too that had badges removed on a widebody.

 

[Yzfguy06]

3.75 from the door jam. 2.5 from the crease in the fender.

 

[Reaperhwk]

3.75 from the door jam. 2.5 from the crease in the fender.

Thanks. I got a PM from a guy who got the same 2.5" from the crease but he also got 3.5" from the door jam? Did you measure right to the closest part of the hellcat? Meaning the "head mohawk" whatever that is.

Anyone can confirm it's 3.5 or 3.75?

 

[Yzfguy06]

Should be 3.5. Sorry not enough coffee yet this morning.

 

[Arabex]

Thanks. I got a PM from a guy who got the same 2.5" from the crease but he also got 3.5" from the door jam? Did you measure right to the closest part of the hellcat? Meaning the "head mohawk" whatever that is.

Anyone can confirm it's 3.5 or 3.75?

Man, you shouldn’t be questioning an Engineer’s with OCD measurements 🤓

Told ya the correct numbers


Cheers,

SAM

😎

 

[Reaperhwk]

Man, you shouldn’t be questioning an Engineer’s with OCD measurements 🤓

Told ya the correct numbers


Cheers,

SAM

😎

lol. Yeah you did.

 

[LarrysRedeye]

Putting badges back on after PPF. Shop didn’t do it and I need a location. Searched online I get some posts about narrow body but I wanted to be sure the WB are the same. They may be different because of the flares.
Can someone give me these measurements to the nearest 1/8”? The picture below I Just got off the internet but wanted to show which areas I need a measurement of. Also, if you put a level like I did below on the hellcat ears are they level? With this info I can easily get them back on. Hopefully help others too that had badges removed on a widebody.
View attachment 599554
View attachment 599555

My width on my 2021 NB/RE is 3 5/8 or 3.625 in.(end of emblem to end of fender) and 2 1/2 or 2.5 from crease in fender to highest point on emblem (which is to the right of your arrow)

 

[Taxinator]

I wonder what the measurements would be for a charger considering the fender crease is much higher…not that is matters to my car, but just wondering.

 

[Reaperhwk]

I’m thinking different. Looks like a wide body and narrow body challengers are different as well.