Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

Brembo Caliper paint corrections

1202 Views 8 Replies 7 Participants Last post by baabootoo, May 25, 2022

HellcatHellYeah

Discussion Starter · May 24, 2022

I have the red Brembo logo 6 and 4 pistons and have some bad paint chips to the metal and the clear coat has come off most of the outer face with the Brembo logo on one. I read that RAL 2030 in Traffic Red matches the red, has anyone used it and how do you like the results? The picture below is of the caliper that the clear coat is gone, I was cleaning with simple green so pretty sure that didn't damage it and the other calipers don't have this issue. Any recommendation on what clear coat to use?

Tire Wheel Automotive tire Automotive lighting Hood

See less See more

Save

1 - 1 of 9 Posts

SickToo

· #8 · May 25, 2022

areuriding said:
Simple Green may be too strong for the clear coat. If you end up repainting them I would ceramic coat them before reinstalling.

I screwed up some powder coat w simple when the stuff first came out. I dilute the crap outta it now and keep it way from finishes. It might be easy on environment but it’s hard on finishes. Good luck w yer rotors

Save

1 - 1 of 9 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month