SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

Calling DrBuick

4293 Views 29 Replies 11 Participants Last post by  Paladin06
DrBuick I have a favor to ask of you....

I just changed the oil on my cat and I didn't think of this until after so I never measured.

I'm thinking of replacing the oil cooler drain plug with a Fumoto valve or EZ Drain next time I change the oil.

Next time you have a cat in the shop for an oil change would you mind measuring the size and thread pitch of the oil cooler drain plug please.

Thank you! For your trouble I'll ask Tammie to text you some pictures of her cat.
1 - 2 of 2 Posts

· Premium Member
Challenger SRT Hellcat
Joined
·
2,437 Posts
Sure, I actually just added the valve, L adapter and a secondary lock (just a clamp) to my cart from a site that sells the EZ Drain but then I decided to hold off. I want to verify the size before ordering. Otherwise I'll end up with $50 worth of stuff that I can use or return by the time I do my next change.

If folks are confident that TallCool1 measurements are correct I can write it up now. I'm just not sure if he got the info. from a reference somewhere or actually measured the drain plug himself... I'd prefer the latter to be sure. Maybe he will see this since I tagged him and chime in.
Oil cooler is 12x1.75 1 inch long

Oil pan is 14x1.5 3/4 inch long both from seal to end of plug
SRC... Double check me but I think my measures are pretty close to what Dak59RT lists on the magnetic drain plugs. Let me know if you see different if it would affect magnetic plug selection different don't think so but keep me honest tks. And tks Dak59RT a(nd Dr. B. I did rely on his data as well...)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top