[GreenMan0352]

So I’m wanting to add a catch can and I was going to order one of the speedlogix ones with the braided hoses. I was also looking at the metco valve cover breathers. From what I’ve read on here the combo of a breather and catch can are suppose to be like PB&J. Am I missing anything? Like are there other things I should add also? I’m opened to other brands but from what I’ve read on here these seem good to go.

 

[baabootoo]

Catch Can Survey | SRT Hellcat Forum I researched one of the smaller threads for you with only 113? posts. Have a happy..............

 

[Linda's Hell Cat]

I have never had a Catch Can on my Hellcat. But The Metco Valve Cover Breather has been on my Hellcat since my Husband popped it on at the Track back in 2015. Probably one of the easiest part to install. He also popped one on his @Top Cat Challenger!

Metco Motorsports Valve Cover Breather (2015+ 6.2L Supercharged HEMI Hellcat Vehicles)

Metco Valve Cover Breather (2015 Hellcat Vehicles) - MBR0019

highhorseperformance.com

 

[WVHEMIS]

I have always used Billett Technology, not a fan of SpeedLogix right now...

 

[GreenMan0352]

I have always used Billett Technology, not a fan of SpeedLogix right now...

Are they having quality issues?

 

[GreenMan0352]

Catch Can Survey | SRT Hellcat Forum I researched one of the smaller threads for you with only 113? posts. Have a happy..............

Yes I had seen that one but it’s over 6 years old so I was trying to see if the answers have changed. A lot can change in that amount of time. Also I’m mainly wanting to see if the brands I’m going with are okay and the braided hoses are good or if I needed anything additional. I may have over looked a required part. I’m not asking if I should add these I’m already set on adding them I’m more making sure the parts aren’t bad. Thank you though

 

[WVHEMIS]

Are they having quality issues?

Their customer service can be sketchy at times. I bought a strut tower brace from them a few years back and had major fitment issues. They were less than helpful. You will have a wait to get product from Billett but their product is one of the best on the market.

 

[Linda's Hell Cat]

Heidi @ Billet has 2 side to their business ans the other side is military. I think this is why there may be hold ups on shipping at times. There hasn't been anyone I've known that did not like owning a Billet Catch can. JLT is very popular too.

I would also check with HHP for a Billet Catch Can Billet Technology Oil Catch Can - 2012+ Jeep - 20111

If they have them in stock, it would be a good benefit for the wait time.tel:18888941115

Linda

 

[GreenMan0352]

Heidi @ Billet has 2 side to their business ans the other side is military. I think this is why there may be hold ups on shipping at times. There hasn't been anyone I've known that did not like owning a Billet Catch can. JLT is very popular too.

I would also check with HHP for a Billet Catch Can Billet Technology Oil Catch Can - 2012+ Jeep - 20111

If they have them in stock, it would be a good benefit for the wait time.tel:18888941115

Linda

So is Billet veteran owned or what do you mean by the military part? They do military contracts too?

 

[Linda's Hell Cat]

So is Billet veteran owned or what do you mean by the military part? They do military contracts too?

I believe contracts. In the past she supported and sponsored Challengerfest, which donations were made to Racing for Vets.
Things happened a few years ago ( Not so Legal) and Billets position had to change. It's complicated and is under layers of past posts.
I know I sat with a bunch of racers at one of the MSH races, I didn't know they were all vets and her employees until later when Heidi came to thank me for paying for their dinner.
HHP is Veteran Owned.
Lot's of Hemi Vet owners and vendors.

Linda

 

[HemiMetal]

I installed a CFM Baffled Billet Valve Cover Breather and a UPR relieve -bracket mounted catch-can as the first two aftermarket bolt-on's for my 2015 cat. I know there's some here and on other forums that see them as a waste of time and money, but I view them as low cost components that can relieve crankcase pressure and filter blowback contamination that might otherwise minimally reduce engine life.

 

[Firsthellcat]

I just ordered a BilletTechnology catch can on the advice from a friend who recommended adding it. I called and talked to one of there guys who was very knowledgeable and friendly. It should ship this week.

 

[GreenMan0352]

I believe contracts. In the past she supported and sponsored Challengerfest, which donations were made to Racing for Vets.
Things happened a few years ago ( Not so Legal) and Billets position had to change. It's complicated and is under layers of past posts.
I know I sat with a bunch of racers at one of the MSH races, I didn't know they were all vets and her employees until later when Heidi came to thank me for paying for their dinner.
HHP is Veteran Owned.
Lot's of Hemi Vet owners and vendors.

Linda

awesome I always try and support Veteran owned businesses as well as Christian run businesses.

 

[Firsthellcat]

awesome I always try and support Veteran owned businesses as well as Christian run businesses.

That’s great. I didn’t know they were. Even better now.

 

[Blkout]

Definitely both, or you can go with a Mighty Mouse catch can which has a breather built in.

Charger / Challenger | mmsolutions (mightymousesolutions.com)

 

[Linda's Hell Cat]

awesome I always try and support Veteran owned businesses as well as Christian run businesses.

I am with you on that!
This is Josh's about on his website. Veteran Owned & Operated

 

[Firsthellcat]

HHP, Very impressive.

 

[Speedlogix Sales]

So I’m wanting to add a catch can and I was going to order one of the speedlogix ones with the braided hoses. I was also looking at the metco valve cover breathers. From what I’ve read on here the combo of a breather and catch can are suppose to be like PB&J. Am I missing anything? Like are there other things I should add also? I’m opened to other brands but from what I’ve read on here these seem good to go.

There are MANY catch cans to choose from. If you have more questions about ours, please feel free to reach out to me directly ( 561-687-3712) or [email protected]. We have a ton of colors in stock and the quality of our cans speak for themselves. We have a ton of pictures and reviews on our website and I am sure even on this forum too. I have had one on my personal 392 for about 6 years now and I am happy with it. Best of luck choosing one that will work best for you

- Alexis

 

[PurpleCat16]

I have both and I also have a check valve, have not had any issues.

 

[GreenMan0352]

I just realized I never posted my catch can 😂

I went with billet technology and I also got the metco valve cover breather. I really like it!