SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!
1 - 12 of 567 Posts

· Registered
2021 Charger Redeye WB
Joined
·
113 Posts
Ordered the DS version for a 21 Charger Redeye. Plan is to run the DSC tune file as I am more of a canyon guy.
Will post my impressions up when I get it in and installed.

I also have a suspension crazy friend who designed his own sus. and simulated it before building and installing so I may do a backup and let him go to town on the options/parameters......
 

· Registered
2021 Charger Redeye WB
Joined
·
113 Posts
Just got mine today and from a hardware perspective, this is very disappointing.

The plastic case looks terrible (fit and finish).
Hardware inside had a bridge wire to fix a mistake
Main (only) controller inside is a cheapo 16-bit DSPIC.
Definitely not even $50 in BOM.
Also for the price, could have tossed in a mini USB cable for it.

Hopefully the difference it makes to the feel of the car will make up for it. Will install it later tonight to test it out.

For those of you interested in the insides:
571412

571413

571414
 

· Registered
2021 Charger Redeye WB
Joined
·
113 Posts
Anyone here played with the tuning to make it a bit more comfortable?
I went on a drive last night after installing this and the regular street cruising was definitely a bit firmer.

My understanding is that I can turn down the default rate a bit on the gcomfort settings and maybe increase the G box and that should give me the desired effects without too much messing about in the other values.

Otherwise, on a bit of a push around some fun roads, this definitely felt more composed!
 

· Registered
2021 Charger Redeye WB
Joined
·
113 Posts
I ordered in mid-March and likely won't see it at my door until June according to Summit. Shortly after placing the order they said it was on national backorder and I would be waiting until April 2022. That is a non-starter to have that kind of coin tied up in a part for a year. I am glad it changed.
I ordered mine from HHP and it shipped the next day basically.
 

· Registered
2021 Charger Redeye WB
Joined
·
113 Posts
No doubt the usual vendors bought stock and have some on hand. However, as I mentioned pages back, I had to get (chase) Summit on the case of adding it to their catalogue. So obviously their purchasing department weren't there yet. Mine is a tale of caution. Summit still has the best international customer service options for folks like me.

Also, I should clarify I should see the part in early-May, not June. Me not so math good.
Nice that you managed to get summit to purchase it.
I have only used them once before but they were not too bad. Not much experience with them though.
 

· Registered
2021 Charger Redeye WB
Joined
·
113 Posts
New member, but was a reader of this thread before ordering. Got my Diablosport box a couple days after ordering it mid last month. Works well, feels more uniform front to rear where I felt the OE file was mainly stiffening rear rebound, but wasn't exactly sure what the file differences were between street-sport-track, so I read them using the DSC software. Once I got that sorted (my files matched the DSC sport files except for the launch timer was cut in half) I decided to check and set zero on the shocks. Seemed like a reasonable thing to do, driver and half fuel weight, leveled surface and all, but after the zero set and reset board, my box also has a read / function error. It seems to still be working properly in the car and I have no error lights (2020 Challenger), but communication is a no go using the DSC software. I never attempted to change the file settings, just did a shock zero procedure per the DSC sport video.
@rayzazoo

I just ran into the EXACT same situation as @SLR

Tried unplugging/replugging, reinstalling drivers, etc. No luck.
 

· Registered
2021 Charger Redeye WB
Joined
·
113 Posts
Due to DS and DSC Sport having two different files loaded -- albeit just one difference being the launch timer.

I've cancelled my DS suspension controller order until they get a fix in place and hopefully an end user firmware installation program for any future firmware.
I ended up pulling mine out and requesting a refund after it locked up and prevented me from adjusting anything.

Hope they figure out the issues :/
 
1 - 12 of 567 Posts
Top