[RGPIII]

 

[RGPIII]

 

[RGPIII]

Does not come with the blue lid. It will have a standard silver lid with it.

 

[2ndgen]

What bearings does it have, and what pulley is on it?

 

[Blkout]

For anyone interested, my car made almost 80whp with a Jokerz race ported blower over the stock blower on E85. It made so much power that it allowed me to drop from a 2.65 upper to a 2.85 upper which means a cooler running blower and less wear and tear. Mine made 892whp SAE on E85 with a 2.85 upper pulley, completely stock engine, stock exhaust manifolds, through the stock catalytic converters.

 

[RGPIII]

Full race bearings from Jokerz. Currently does not have a Pulley on it. I do have a Griptec setup for it if interested.

 

[2ndgen]

the hybrid ceramic? or SS bearings?

 

[RGPIII]

the hybrid ceramic? or SS bearings?

this is the package, not sure which ones he used. I know they are rated for higher rpm.

Jokerz IHI Race Blower Package - Jokerz Performance

Jokerz Race blower package includes a race rebuild and Full Tilt port work. Jokerz hellcat/demon/redeye/trackhawk port program. Industry first CNC port program for Hellcat / Demon / Trackhawk / Redeye Supercharger. We also have the first IHI blower in the 8s boost only. This package has netted...

jokerzperformance.com

 

[16GoManGoHC]

the hybrid ceramic? or SS bearings?

this is the package, not sure which ones he used. I know they are rated for higher rpm.

Jokerz IHI Race Blower Package - Jokerz Performance

Jokerz Race blower package includes a race rebuild and Full Tilt port work. Jokerz hellcat/demon/redeye/trackhawk port program. Industry first CNC port program for Hellcat / Demon / Trackhawk / Redeye Supercharger. We also have the first IHI blower in the 8s boost only. This package has netted...

jokerzperformance.com

Looks like they don’t even change the gear side bearings?? So 2 $50 ceramic bearings in the inlet plate is all you get?? This screen shot taken from the link above

 

[RGPIII]

Looks like they don’t even change the gear side bearings?? So 2 $50 ceramic bearings in the inlet plate is all you get?? This screen shot taken from the link above

The fully ported Snout with new bearings and the billet front bearing plate with new bearings there as well.

 

[RGPIII]

if you take your blower case with good rear bearings, and have all the parts out of my blower installed in them from jokers. you will have a fully ported race blower with the billet plate for less than you can send it out and have it done for on yours. bearing plate alone is $1400. snout porting without a core is 1829.00. plus it has good cooling bricks in it, bypass valve and a lid. if it wasn't making noise from the bearings it would have it listed for $4,500.

 

[RGPIII]

Jokerz IHI Snout Porting Service - Jokerz Performance

- Snouts are CNC'd with a 5 axis cnc with jokerz port design - Snouts are welded on to gain area internally for performance gains - Gains of roughly 15+whp over stock non ported snout. - All prices include assembly, disassembly, oil, and cleaning - We offer 2 different kinds of rebuilds for...

jokerzperformance.com

 

[ScLeCo]

I'd buy the snout and bearing plate if you ever decide to separate.

 

[RGPIII]

I'd buy the snout and bearing plate if you ever decide to separate.

if I don't sell this and my 2.7 redeye blower as a set, ill work on taking the 2.4 apart and selling just the snout and plate.

 

[RGPIII]

Also if anyone is interested in a Redeye/Demon 2.7 blower. I will part with my low mileage 2.7 with a 3.10 Metco upper on it for $5,000.

 

[RGPIII]

Ported 2.4 is sold. The stock 2.7 is still available.