If so, can you give me any pointers as to how to get the console apart. I have done couple of Hurst installs in 10's and 12's so i am somewhat familiar,but not a 15.
Barton has a vid on their site for a 14, but not the same at all
I do know that there is a bolt on the back bottom of each side of the console covered by a square plug that need to come out.
I am wondering if the bezel around the shifter boot snaps out like previous ( I tried it a bit and seems pretty solid in there, don't want to break anything ) and how to remove the top cover.
I can probably muddle thru the rest and figure it out
Thanks for any help
Barton has a vid on their site for a 14, but not the same at all
I do know that there is a bolt on the back bottom of each side of the console covered by a square plug that need to come out.
I am wondering if the bezel around the shifter boot snaps out like previous ( I tried it a bit and seems pretty solid in there, don't want to break anything ) and how to remove the top cover.
I can probably muddle thru the rest and figure it out
Thanks for any help
