SRT Hellcat Forum banner

HellCat Chrysler 300 build!!!

2 reading
79K views 26 replies 14 participants last post by  AJ4Life  
#1 ·
Hey guys I recently joined the site and am excited to share my build I am working on. I recently got my hands on a lot of hellcat parts, engine / transmission / pcm /driveshaft etc... Basically all of the parts for a conversion minus a few things here and there. The car I am doing the conversion on is a 2015 Chrysler 300 V6 rwd. I have a YouTube channel where I am documenting the build and I try to post videos once a week or so. I will post a link below to the 2 most recent videos.
Comments and questions are welcome and be sure to share the build with your friends! I will answer your questions to the best of my abilities.
Thanks for looking!


 
#14 ·
Hey y’all, I was in the market for a 300 SRT for years, but the 2012-2014 5spd was always a setback for future 392 or hellcat swap.
I recently bought a beautiful clean 2015 chrysler 300s 5.7 w 8spd. I’ve been looking into a 392 swap, but figure how much more is a hellcat with all the crashed ones and readily available engines, or even paying the 24k from dodge with warranty.

I know that you have to install the Brembo and suspension, I’m reading here that the frame needs reinforcement? Is there anything else needed for the swap. Is there any shops in Northern California that do this?
Thanks in advance
571552
 
#16 · (Edited)
Midnite300S, I had the same thought! I had a brilliant black supercharged 06 300 SRT8. Loved that car till the Hellcats came out. Now I have a phantom black 300S V6 as my daily. I’ve done all the appearance upgrades already, but would love to do a Hellcat swap on it.

571555