SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

Hellcat lowering springs VS Scat Pack Lowering springs on Wide Body

3490 Views 11 Replies 8 Participants Last post by  luvboost
Was shopping for springs for the hell cat and noticed that the Eibach part number between the scat pack and hellcat are the same. I guess Eibach made the same spring rates for both? My only question is the spring rates are increased on the hellcat from the scat pack so I guess Eibach didn't care about compensating?

Are there any springs out there that do compensate for the additional spring rate that the hell cats came with?

I had eibachs on my WB Scat and I felt like the fronts were just a tad soft so I'd hate to see what the hellcat would feel like on the same springs with the increased weight.

Thoughts ?
1 - 1 of 12 Posts
You can see how high the WB scats sit. They sit as high as a awd challenger
Actually it is an optical illusion, I have a 2019 WBSP and my buddy has a 2019 Shaker regular body side by side they look dramatically different measuring them mine is less than a 1/4 inch higher measured in multiple locations. His car at the time had 10000 miles mine has 800.

I forgot to add where the illusion comes into play is the wheel gap, the added flares sit higher to fit the lager wheels and tires. that measurement was dramatically different by 3/4 of an inch.

Ed
  • Like
Reactions: 1
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top