[Texas6speedCat]

Does anyone happen to know the part number for the spline supercharger lid bolts? Stripped one need to replace.

 

[xcesiv]

They list a 12mm & 20mm bolt. I believe you need the 20mm, as the description states: “Fits top lid, bypass adapter- drive snout side.” Here is the link:

Replacement Dodge Hellcat torx bolt, 20mm long – Jon Bond Performance LLC

I pulled up the mopar parts diagram & it shows a few different bolts in the photo, yet the list only shows one part number & it was for one of the longer bolts.

 

[Texas6speedCat]

They list a 12mm & 20mm bolt. I believe you need the 20mm, as the description states: “Fits top lid, bypass adapter- drive snout side.” Here is the link:

Replacement Dodge Hellcat torx bolt, 20mm long – Jon Bond Performance LLC

I pulled up the mopar parts diagram & it shows a few different bolts in the photo, yet the list only shows one part number & it was for one of the longer bolts.

 

[Texas6speedCat]

Thank you so much! Appreciate you couldn't find it on the mopar site