SRT Hellcat Forum banner
  • Hey Everyone! Enter your ride HERE to be a part of this months Ride of the Month Challenge!
1 - 20 of 73 Posts

·
Registered
Challenger SRT Hellcat
Joined
·
465 Posts
So Doc is there an internal plastic sleeve as well as external? Just curious Thanks
 

·
Registered
Challenger SRT Hellcat
Joined
·
465 Posts
Ok that will be easier on the nuts too! :D
 

·
Registered
Challenger SRT Hellcat
Joined
·
2,800 Posts
Discussion Starter · #8 ·
They are 7/8 and 22 are close.
3/4 and 19mm
13/16 and 21mm
15/16 and 24mm
 

·
Registered
Challenger SRT Hellcat
Joined
·
905 Posts
Nice! Wish they would sell just the one we need for the lugs! Had the tires changed on my '13 SRT8 a week ago and they chipped and scraped up all the wheels. A socket like this would've saved about 1/2 the damage. A claim with their insurance is pending!
 

·
Premium Member
Challenger SRT Hellcat
Joined
·
5,013 Posts
is a astro got the set from Matco tools. Was 55 for 5 sockets part number 7835

Astro pneumatic tool company View attachment 4901 View attachment 4902
I've got the same exact socket (the set). The outer plastic shield cracks easily (don't drop them) and the inner plastic insert starts to fall out after time. They do the job but quality is sub par IMO. I realize it's Astro. Get what you pay for.
 

·
Premium Member
Challenger SRT Hellcat
Joined
·
1,925 Posts
BTW, if the Hellcats use the same crappy clad covered lug nuts as other SRT cars, ditch those POS and get a good aftermarket set, Gorilla is one mfg.
 

·
Premium Member
Joined
·
13,620 Posts
Depends on what your local tech wears
My tech wears a freaked out smile because I am watching every move he makes on my Hellbaby and I am not confident he is skilled as you are so, he may be wearing tears soon if I am not happy with the outcome...
 

·
Premium Member
Challenger SRT Hellcat
Joined
·
1,536 Posts
I hadn't realized the lug nuts were 22mm until I went to test the clearance of my deep socket, which was 21mm as that is what my 2010 used. Had to get a new deep socket and a new lug wrench that had 22mm on it. When it's not so damn cold out I'll do a test fit and put my wheel locks on.
 
1 - 20 of 73 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top