SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

Here is my socket for my hellcat lug nuts

13500 Views 72 Replies 24 Participants Last post by  SRT_HC_707
is a astro got the set from Matco tools. Was 55 for 5 sockets part number 7835

Astro pneumatic tool company
Green Product Finger Nail
Green Finger Hand Footwear Thumb
1 - 2 of 2 Posts

· Premium Member
Challenger SRT Hellcat
Joined
·
1,536 Posts
I hadn't realized the lug nuts were 22mm until I went to test the clearance of my deep socket, which was 21mm as that is what my 2010 used. Had to get a new deep socket and a new lug wrench that had 22mm on it. When it's not so damn cold out I'll do a test fit and put my wheel locks on.
 

· Premium Member
Challenger SRT Hellcat
Joined
·
1,536 Posts
DrBuick manual says the lugs are 22mm. 7/8 is close and would work, but is slightly larger.. I'd be too worried about stripping something on the lugs. From the owners manual:

Lug Nut/Bolt Torque **Lug Nut/ Bolt Size
Lug Nut/ Bolt Socket Size 111 Ft-Lbs (150 N·m) M14 x 1.50 22 mm
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top