[dodgeboy]

My 2006 SRT8 had a hidden menu on the EVIC that could be accessed by holding two buttons on the steering wheel. Does anyone know if something similar exists on the hellcat?

 

[tsc]

Taken from the Hellcat Wiki and my previously provided info:

http://www.hellcat.org/wiki/?title=Helpful-Tips-and-Tricks

11) Engineering mode: You can access an Engineering mode within UConnect that allows you to view numerous items. Disclaimer: We do not take responsibility if you break anything while in these screens! In order to access, hold both driver-side temperature buttons at the same time for 5-7 seconds and the menu should open.

12) Dealer mode: You can access Dealer mode within UConnect. This is typically used by service technicians. For non-navigation units you can activate Navigation IF you have the 15-digit code that is generated elsewhere. Sorry, no free Navigation upgrades. Disclaimer: We do not take responsibility if you break anything while in these screens! In order to access, hold both driver-side temperature and front defrost button at the same time for 5-7 seconds and the menu should open.

 

[dodgeboy]

Thanks. I'm surprised I hadn't seen any of that info posted previously. Sorry for the redundant question.

 

[Carnage]

Taken from the Hellcat Wiki and my previously provided info:

http://www.hellcat.org/wiki/?title=Helpful-Tips-and-Tricks

11) Engineering mode: You can access an Engineering mode within UConnect that allows you to view numerous items. Disclaimer: We do not take responsibility if you break anything while in these screens! In order to access, hold both driver-side temperature buttons at the same time for 5-7 seconds and the menu should open.

12) Dealer mode: You can access Dealer mode within UConnect. This is typically used by service technicians. For non-navigation units you can activate Navigation IF you have the 15-digit code that is generated elsewhere. Sorry, no free Navigation upgrades. Disclaimer: We do not take responsibility if you break anything while in these screens! In order to access, hold both driver-side temperature and front defrost button at the same time for 5-7 seconds and the menu should open.

Very cool I wonder what options are available in there hmmmmmmmmm

 

[eRaced Cat]

I got into the menu's today. Not much there. Tells you how much space available. I had 85mb free. It also recorded record temps, but they were all 0*C. Showed CPU load, and a few other things that really don't do much. Most is reset to default, debug, and information.

 

[JollyRoger]

Good to know

 

[wmurph3]

can you delete the p1400 code from in here haha