SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

K

1927 Views 28 Replies 9 Participants Last post by  motorheadmike
.
1 - 20 of 29 Posts
I can buy a lot of tested and proven SRT filters for that kind of money.
  • Like
Reactions: 1
I can buy a lot of tested and proven SRT filters for that kind of money.
Exactly!!
Why? 3 Viper SRT filters (18 months worth) 30 bucks on ebay.

Sent from my SM-G986U using Tapatalk
  • Like
Reactions: 1
just buy the K&N HP-2010 filter :)(y)
  • Like
Reactions: 2
look up LACA 707 on youtube his most recent video is a comparison of different filters he's used on his hellcat. K&N HP-2010 came out on top
  • Like
Reactions: 1
Per the K&N SS-2010 Website, this unit does not have an "Anti Drain-Back" Valve (the black rubber valve visible under the small holes surrounding the one big mounting hole) which Factory Units do have and is GOOD to have so the oil does not drain out of the oil galleries and back to the crankcase after engine shutdown.

I also could not find anywhere what the "Micron" Filter Rating is for this unit which is important to know.

For me, NOPE!
  • Like
Reactions: 2
This is intended for track vehicles where you need to change the oil constantly. Not normal daily drivers or weekend vehicles.
  • Like
Reactions: 1
If we want to discuss oil filters, look here: Engine Oil Filter Study

Then we can discuss how we unnecessarily change oil filters running synthetic oil at every oil change, and there is nothing inside a used oil filter to see or that says we should replace the oil filter.

Would you run an oil filter running synthetic oil for 20K miles??? 40K miles???
Comments are great, but nobody actually answered my original question.
If that's all you wanted to know, I'll go out on a limb and answer your question: Yes, I'm sure that somebody has.
Per the K&N SS-2010 Website, this unit does not have an "Anti Drain-Back" Valve (the black rubber valve visible under the small holes surrounding the one big mounting hole) which Factory Units do have and is GOOD to have so the oil does not drain out of the oil galleries and back to the crankcase after engine shutdown.

I also could not find anywhere what the "Micron" Filter Rating is for this unit which is important to know.

For me, NOPE!
This is what I use 99% at 20 microns EAO11 is the size for Cats
1 - 20 of 29 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top