SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

Kenne Bell Supercharger Belt breaking all the time

996 Views 14 Replies 6 Participants Last post by  Sarna March
Been running my Kennebell 4.7 for couple years now and seem to go thru belts. I have gates 10rib and was wondering is there a stronger belt out there. Or could it be another issue that is breaking belts beside to much power?
Hood Motor vehicle Automotive tire Automotive design Automotive lighting
Motor vehicle Font Road surface Asphalt Gas
See less See more
1 - 1 of 15 Posts
Something may be out of round or balance with the pully. Check the ribs on the Pully for no damage that might cause slicing ( Which you probably have ) Checking your hood doesn't have anything touching. Also it isn't good if you just make a sudden lift off the throttle.
4.7 is a lot of Power! I had a Kenne Bell 4.2 on my 2010 SRT8 installed by Tim Barth and these were things he had mentioned when other people had posted up problems.

I hope you get it figured out,
Linda :)
1 - 1 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.