[Flight of the Super Bee]

Greetings, everyone.

I'm looking for a set of factory open-ended lug nuts. Not Gorillas or anything that has a smaller seat diameter, etc. Or if someone can PM me a VIN so I can order (is that all that's required?) Or if someone swapped their lugs to aftermarket, I would be interested in buying your used ones. I know first-gen Charger police cars with steel wheels used to run them and there's a part number for that, but I'm sure they're different.

Thanks, I don't actually own a Demon, so I apologize in advance (it's on the list one day hopefully maybe?), but just running the factory Demon wheels on my '12 Charger.

Thank you in advance.

 

[GreenMachine15]

They likely share a part# with a lower model car. Just get a vin off of eblay and call a dealer and order them. Or buy a set of titanium open ended nuts.

 

[rickydeuce]

I'll keep looking for the part# as I took a pic somewhere. But the 1320 comes w/ open ended lugs, so you should be able to order them w/out a VIN#.

 

[GreenMachine15]

Hey Ricky Deuce!
Hows that new ride doing?

 

[Slidd]

These pics were posted in the 1320 thread..

Sent from my SM-N960U using Tapatalk

 

[rickydeuce]

These pics were posted in the 1320 thread..

Sent from my SM-N960U using Tapatalk

Thanks! Those are the pics I was looking for!

 

[rickydeuce]

Hey Ricky Deuce!
Hows that new ride doing?

So far so good. Looking forward to upgrading to the Stage kits when they become available.

 

[GreenMachine15]

So far so good. Looking forward to upgrading to the Stage kits when they become available.

Great man!
Hey, I will keep my eye out for you at Carlisle.
If you see my car, stop by and bs a little.

 

[Flight of the Super Bee]

Thank you, Slidd, as well as Ricky Deuce for chiming in. Yeah, I figured the first-gen Charger steel-wheel police car lugs were different, but these look like they will fit the bill nicely! It would be interesting if they were indeed the same part # as the Demon, but I think it's a moot issue at this point. They seem to have the wide seating area of the Demon, etc. Also, thanks to GreeMachine1 for the ebay VIN idea. Any link to those titanium lug nuts? Anyway, you guys are the best!

Edit: In my research, for all compatible applications for the below, it lists them for steel wheels only, even though it will say Challenger R/T Scat Pack, etc. Did Challenger R/T Scat Packs ever come with steel wheels or any other "higher end" Challenger? Just weird...

Part Number: 06511418AA
Supersession(s): 06509421AA; 06513423AA; 6511418AA

 

[GreenMachine15]

There you go

14x1.5 Titanium Lug Nuts Cone Seat

Manufactured from aerospace grade 6AL4V Titanium, these titanium lug bolts will not corrode or rust and offer a significant weight savings over steel lug bolts while giving a very sporty and aggressive look. 60 degree conical base (also known as a cone or acorn base). 20 piece set All nuts shown...

www.acerracing.com

Natural finish or black
Open or closed end

 

[Slidd]

Thank you, Slidd, as well as Ricky Deuce for chiming in. Yeah, I figured the first-gen Charger steel-wheel police car lugs were different, but these look like they will fit the bill nicely! It would be interesting if they were indeed the same part # as the Demon, but I think it's a moot issue at this point. They seem to have the wide seating area of the Demon, etc. Also, thanks to GreeMachine1 for the ebay VIN idea. Any link to those titanium lug nuts? Anyway, you guys are the best!

Edit: In my research, for all compatible applications for the below, it lists them for steel wheels only, even though it will say Challenger R/T Scat Pack, etc. Did Challenger R/T Scat Packs ever come with steel wheels or any other "higher end" Challenger? Just weird...

Part Number: 06511418AA
Supersession(s): 06509421AA; 06513423AA; 6511418AA

They are open to work with the small hubcaps on the police steel wheels. Highly doubt that they would make another run of open lug nuts for Demon and 1320 so I bet they are the same. I'd run factory lug nuts on OEM wheels before anything aftermarket but that's just me. Get a 1320 VIN and see what the parts man says.


Sent from my SM-N960U using Tapatalk

 

[Flight of the Super Bee]

They are open to work with the small hubcaps on the police steel wheels. Highly doubt that they would make another run of open lug nuts for Demon and 1320 so I bet they are the same. I'd run factory lug nuts on OEM wheels before anything aftermarket but that's just me. Get a 1320 VIN and see what the parts man says.


Sent from my SM-N960U using Tapatalk

So the 1320 also requires a VIN to order parts? I was wondering why it never shows up in the standard list of Dodges. And I agree, wanted OEM lugs for my OEM wheels. Currently running some lame racer boy lug nuts that the local tire place sold me as a requirement to mount the wheels.

 

[Slidd]

So the 1320 also requires a VIN to order parts? I was wondering why it never shows up in the standard list of Dodges.

No don't think so but would make it easier for him to come up with the exact part number.


Sent from my SM-N960U using Tapatalk

 

[Flight of the Super Bee]

Hopefully the part number that comes up is the same as the bag in the pictures, or I'd be really confused. Also, acquired a VIN from a 1320 for sale online, so we will see...

 

[Slidd]

Hopefully the part number that comes up is the same as the bag in the pictures, or I'd be really confused. Also, acquired a VIN from a 1320 for sale online, so we will see...

Let us know!

Sent from my SM-N960U using Tapatalk

 

[Flight of the Super Bee]

And to further kick the dead horse, looks like Dorman 611-979 is a non-factory replacement. You get 10 for the price of one, basically. Of course, "Dorman" so can't vouch for it.

Product Description
These wheel lug nuts are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

• Carbon steel - materials meet SAE automotive industry standards for strength and durability
• Corrosion tested - 72-hour salt spray testing to simulate three years of corrosion resistance
• Tensile tested - lug nuts undergo industry-standard proof-load testing to ensure strength
• Trustworthy quality - backed by team of professional engineers and quality control specialists in the United States

Detailed Applications

Product Specifications

Depth:	18.23 mm
Grade Type:	Regular
Hex Size:	22 mm
Open End Design:	Yes
Package Contents:	10 Wheel Nuts
SAE or Metric:	Metric
Seat Style:	Conical Seat - 60 deg
Shank Length (In):	6 mm
Thread Diameter:	M14
Thread Pitch:	1.5
Thread Type:	Fine
Washers Included:	Not Required
Wheel Lock Key Included:	Not Required
Width:	29.35 mm
Package Quantity:	10
Packaging Type:	Box
Color:	Clear Chromate/Zinc-Plated
Material:	Steel
Thread Size:	M14-1.50
Overall Length:	26 mm
Wheel Nut Style:	Standard
Thread Direction:	Right Hand Thread

OE Numbers

DIRECT OE CROSS
6509421AA	CHRYSLER
6511418AA	CHRYSLER

 

[dragrcr]

I have a set with locks that are used. I may be able to let them go. I am selling the wheels and not sure if the lug nuts will go with them at this moment.

 

[dragrcr]

Demon Lug nuts (on the right)

 

[Flight of the Super Bee]

Thank you for your consideration, dragrcr.

 

[ddivinia]

So for demon factory lugs is the number: 06511418AA. ?

Lots of them on EBay.

D.