[magnummrk]

A few good things for my Hellcat today, the radiator extra hose clamp so it don't blow off.
My door sills came today and were installed. I hit 500 Miles today and gave her a wash. Now Im just waiting for my head rests from Jina, they should be here on Monday View attachment 7539 View attachment 7540 View attachment 7541

All looks good!

Where did you get the hose clamp from?

 

[magnummrk]

You can get that style clamp from any marine store. Very common in marine applications.

Another option is Mcmaster Carr. They have just about every option!

Thanks, will try and find them on McMaster

 

[magnummrk]

Here is what you want McMaster-Carr

I found those, just not sure what style to get

 

[magnummrk]

I would get the Vibration-Resistant Worm-Drive Hose and Tube Clamps in 304 stainless. You don't need the 316 for this application. This is a high torque clamp.

If you need some help let me know. Need the diameter of the hose and we can get the exact part number. I'm not near my car or I would measure the hose for you.

It appears to be 2.5" This is the one I had on the wrong end

 

[magnummrk]

I would get the Vibration-Resistant Worm-Drive Hose and Tube Clamps in 304 stainless. You don't need the 316 for this application. This is a high torque clamp.

If you need some help let me know. Need the diameter of the hose and we can get the exact part number. I'm not near my car or I would measure the hose for you.

So these?

McMaster-Carr 5661K13

They look similar to the cheap clamps you can get at the local parts store? I do trust ya though!

Won't link it!

 

[magnummrk]

Went to the BMW dealer and got 2 (was not 100% of the size) hose clamps as pictured. The funny thing was they gave them to me!

 

[magnummrk]

A few good things for my Hellcat today, the radiator extra hose clamp so it don't blow off.
My door sills came today and were installed. I hit 500 Miles today and gave her a wash. Now Im just waiting for my head rests from Jina, they should be here on Monday View attachment 7539 View attachment 7540 View attachment 7541

Well I got the 1 size larger hose clamp just like yours and put it on just now. Kind of a pain, but I was able to slip it together then slide it down the hose. I also rotated it more upwards so I was able to use a long skinny screwdriver to tighten it.

 

[magnummrk]

Were you able to torque it to what the recommendation was from Fnkychkn? How do you know its right? I am just waiting for my dealer, I can see me screwing it up.

I took a good guess. The way it is on there I doubt I could have over tightened it