SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!
1 - 7 of 7 Posts

· Registered
Charger SRT Hellcat
Joined
·
351 Posts
Discussion Starter · #1 ·
I'm hoping someone with access to tech authority can help me out here. I'm looking for a wiring diagram that includes the connector in the overhead console of the Charger. I'm hoping to find a switched 12V supply in that connector, but I can't seem to find it. I found a couple wires that read low (11.3V, when the battery is at 12.2V), but nothing yet that's a true 12V switched. I have to believe that the ones that read low are offering varying levels of resistance to ground for different sunroof commands.

I'm wiring a radar detector. I followed the other threads where folks ran it all the way to the 12V accessory outlet in the console, but I was hoping to find something in the overhead console. Since I have a sunroof, I figured there must be a 12V switched supply on that connector (I've had luck with that in the past). And I already have the overhead console removed.

I appreciate any help you guys can provide. The one wiring diagram that I found (on a tech authority demo) isn't right. The colors don't match at all.

Thanks!
 

· Registered
Charger SRT Hellcat
Joined
·
351 Posts
Discussion Starter · #3 ·
I cycled through the pins again, and I don't think there's a 12v switched source in that harness. Pretty disappointing... I really don't feel like tearing the console apart. I didn't see any wiring in the driver kick panel area, either.
 

· Registered
Charger SRT Hellcat
Joined
·
351 Posts
Discussion Starter · #4 ·
I paid for a 3 day subscription to tech authority and confirmed there is no switched 12v source at the overhead console. It looks like there is at the mirror connector. Now I just need to get the plastic covers off without breaking them.
 

· Registered
Challenger SRT Hellcat
Joined
·
1,080 Posts
Console is easy to get out
 

· <Insert witty title here>
Charger SRT Hellcat
Joined
·
554 Posts
I paid for a 3 day subscription to tech authority and confirmed there is no switched 12v source at the overhead console. It looks like there is at the mirror connector. Now I just need to get the plastic covers off without breaking them.
Use all 72 hours to archive anything and everything related to the car.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top