SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!
1 - 6 of 6 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hello, new to site. Been reading post on the issues or problems I’m not sure about on here ,and hoping some of you can help .!So the lady has a 2018 charger rt , put staggered hellcat replicas 20x9 in front and 20x11 in rear ,but I’m having a hard time finding a perfect front and back size where I don’t want it to slant in at all on the rear so I’m thinking 305s and for the front with it being a 20x9 there’s where I’m not sure what would be a good fit or where it wouldn’t look right because rear is wider ? Also read on here about the pirelli p zero tires giving problems and being all over the place on road so I don’t want wrong configuration where there will be handling problems ? Any advice will help !
 

· Registered
Charger 392
Joined
·
224 Posts
I have the same size wheels on the Charger. I put the 245-45-20's on the front and the 305-35-20's on the rear. The rear is only 0.3 inch lower. You can not tell by looking at the car. (28.7 inch front/ 28.4 inch rear diameter) I have had a lot of success with the Continental Extreme Contact.
 

· Registered
Joined
·
3 Posts
Discussion Starter · #5 ·
I have the same size wheels on the Charger. I put the 245-45-20's on the front and the 305-35-20's on the rear. The rear is only 0.3 inch lower. You can not tell by looking at the car. (28.7 inch front/ 28.4 inch rear diameter) I have had a lot of success with the Continental Extreme Contact.
And thank you also how does the car handle .do I have to buy super expensive tires or?
 

· Registered
Charger 392
Joined
·
224 Posts
Not sure of your suspension. Mine is not stock at all. If OEM suspension like said, I find the Continental tires fairly inexpensive with regards to what you get. Good handling and fairly comfortable ride on the highway.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top