SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

Not building boost when accelerating

3312 Views 14 Replies 10 Participants Last post by  snguyen2688
Help! I have a 16' at idle it reads vacuum fine but when I accelerate the boost gauge goes up to 0 and that's it. I don't hear any noises from the supercharger like others posted. Any ideas?
1 - 4 of 15 Posts
Yes pulley and belt is there. I also removed the belt and checked if the pulley had any play, didn't find any. Did notice something in the pulley.
Automotive tire Motor vehicle Automotive design Automotive lighting Rim
See less See more
Alright thank you I'll look into and see what I find!
what was the fix? same problem here?
The drive pulley fixed my issue!
  • Like
Reactions: 1
1 - 4 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.