[Denver 3d printing]

Hey, guys am not new here but thought I should introduce myself and some of what I do. some of you may already have my intake system and many of you may not have even heard about them.

I'm Cody Zimmerman I make a few intakes mainly for the Redeye, Superstock, and Demon. I can also match up your throttle body size on older hellcats well I have a few new products coming out here is a glimpse of one hellcat air intake lid for the 15-18 getting close to production on this one. few more tweaks

I believe the dodge has done a great job with most of the intakes on this platform but they can be a bit ugly. Redeye is no exception so I created a carbon tube replacement I use 3mm thick prepreg carbon to block the heat. This doesn't add much to sound but looks amazing and utilizes the factory or demon create a filter, I also have an addon to use any 7-inch flange filter like the green filter #7123 or AFE makes a few as well. Found here Filter adaptor Carbon intake Challenger or Charger Redeye

I also make a higher performance line of 3D printed tubes that is all in one piece Intake can also make them fit the 18 and older for people that have changed to demon/redeye hoods. I have set up for Hellcat Durango's TRX

other things I can make are my fancy phone holder that goes in place of the coin catch Challenger or Charger these are going to change and include an auto clamping wireless charger soon. please feel free to browse my website I do a lot of custom work switch holders are popular also on the 3d printed intakes I can do custom graphics and on the carbon ones I can do custom engravings website home

 

[-Boosted-]

What’s the price for a Redeye tube?

 

[SloWhite]

Would LOPVE to just change out the tube BUT reused factory filter it came with............

 

[Jon P]

Hey, guys am not new here but thought I should introduce myself and some of what I do. some of you may already have my intake system and many of you may not have even heard about them.

I'm Cody Zimmerman I make a few intakes mainly for the Redeye, Superstock, and Demon. I can also match up your throttle body size on older hellcats well I have a few new products coming out here is a glimpse of one hellcat air intake lid for the 15-18 getting close to production on this one. few more tweaks
View attachment 602699

I believe the dodge has done a great job with most of the intakes on this platform but they can be a bit ugly. Redeye is no exception so I created a carbon tube replacement I use 3mm thick prepreg carbon to block the heat. This doesn't add much to sound but looks amazing and utilizes the factory or demon create a filter, I also have an addon to use any 7-inch flange filter like the green filter #7123 or AFE makes a few as well. Found here Filter adaptor Carbon intake Challenger or Charger Redeye

I also make a higher performance line of 3D printed tubes that is all in one piece Intake can also make them fit the 18 and older for people that have changed to demon/redeye hoods. I have set up for Hellcat Durango's TRX

other things I can make are my fancy phone holder that goes in place of the coin catch Challenger or Charger these are going to change and include an auto clamping wireless charger soon. please feel free to browse my website I do a lot of custom work switch holders are popular also on the 3d printed intakes I can do custom graphics and on the carbon ones I can do custom engravings website home

View attachment 602701 View attachment 602702

I’m interested. Actually I just posted about the need for this in the other thread. Do you have any sound clips or performance data between your intake and stock?

 

[Denver 3d printing]

I’m interested. Actually, I just posted about the need for this in the other thread. Do you have any sound clips or performance data between your intake and stock?

flow bench on the carbon to stock was just slightly better with the one piece and green filter there were much better gains since I am a mile high I don't publish data because well it's 15% less than my competitors. also, dyno results are worthless with this setup because I can afford to rent a wind tunnel dyno because stock intake out preforms any other intake at speeds I call it positive displacement with the scoop and the headlight the air box actually gets pressurized. as for sound clips I really don't have any stock sound clips and every buddy's cars are different if you want sound LMI and Bwoody have me beat.

 

[Denver 3d printing]

What’s the price for a Redeye tube?

$325

 

[Denver 3d printing]

Would LOPVE to just change out the tube BUT reused factory filter it came with............

That's what this does...

 

[Sjg3rd]

I have the carbon fiber intake tube for my 2021 charger redeye and it's a top notch product. Worth every penny.

 

[Jon P]

I have the carbon fiber intake tube for my 2021 charger redeye and it's a top notch product. Worth every penny.

Would you have any sound clips by chance or any other data. Thanks

 

[Unholy707]

What kind of material is this printed with and what kind of printer

 

[Denver 3d printing]

What kind of material is this printed with and what kind of printer

It’s printed with PA6CF what printer it’s printed with has nothing to do with any thing and depends on the day could be one of many of my inclosed printers with the right build volume.

 

[Unholy707]

I was just wondering is they were industrial printers or custom rigs and what the process was - looks like a nice product!

 

[Denver 3d printing]

I was just wondering is they were industrial printers or custom rigs and what the process was - looks like a nice product!

Mostly custom printers

 

[Frankjr392]

$325

 

[JRod310]

A very satisfied customer here! Out with the OEM bulky air inlet tube and in with a functional, clean refined look. Easy to install, great build quality and zero complaints. Slight increase in the SC whine is an added bonus!
** EDIT ** No error codes. The bypass hose to the purge valve is eliminated and replaced with a breather.

 

[Sarna March]

Can you print big stuff on the order of 1X1 foot by 6 foot long?

 

[Denver 3d printing]

Can you print big stuff on the order of 1X1 foot by 6 foot long?

I have a printer that can do about 8in x8in and as long as I want