Older Hellcat questions

L_Diablo · 2022-03-02

I have a stock, 2016 Hellcat coupe. Wanting to put the MT/ET next. Do I need a wide body kit to accommodate the MT? & if so, can I use my stock rims? Thanks.

GreenMachine15

· #8 · Mar 2, 2022

Spartacus said:
I've seen people stuff 315's in a NB but many of them report having to tweak some things to make them not rub.
You have to start with the correct offset rim for one thing.

Possibly spacers and minor wheel well adjustments. Don't know if they had to roll the wheel well lip with the baseball bat trick.

It depends on the specific tire too as well as the size.

There is nothing to roll on the rear of a NB Challenger.

2015 Hellcat Challenger A8 Sublime. Engine: 2.85 Metco, 10%OD ATI, Metco Idlers, hpindy 15% UD acc crank pulley, TBA Lwr Idler, FI SC Spacers, 180 Thermo, 1050X Injectors, FAS Ported Snout, FAS Billet Bearing Plate, CFM 105mm TB, JLT CAI, JLT Oil Seperators, TBA Boost Ref Adptr - Tuning: OST Dyno Engine 93/C16 & Trans via MPVI2 Hp Tuners - Exhaust: JBA Catless Downpipes, Trackhawk Exhaust Tips - Drivetrain: 3.09 Rear Diff, DIRS & Race Brace, 1pc DSS Aluminum DS, BMR Modded Safety Loop, Petty Trans Brace - Suspension: Eibach Pro-kit Springs, Eibach Front Upper Adj Arms, BMR Rear Lwr Arms, BMR Subframe Connectors, Speedlogix Front Strut Brace, Petty Ent Rear 4pt Shock Tower Brace, Bwoody F/R Sway Bar Links, Short rears - Wheels/Tires: 10.5 Replicas, 305 Nitto 555R Drag, Black Lug Nuts, Blackout Center Caps - Exterior: Perf Wing, ZL1 Splitter/Rear Diffusr/Side Skirts/Rear Ext, Redeye Emblems, Blackout Front/Rear Emblems, AMD Fuel Door, Fastys LED Tubes, Tint, Oracle Markers

Reply

Save

Like

GreenMachine15

· #9 · Mar 2, 2022

2

This is a 17x10 with a 315 on a NB

Tire Automotive parking light Wheel Car Vehicle

See less See more

2015 Hellcat Challenger A8 Sublime. Engine: 2.85 Metco, 10%OD ATI, Metco Idlers, hpindy 15% UD acc crank pulley, TBA Lwr Idler, FI SC Spacers, 180 Thermo, 1050X Injectors, FAS Ported Snout, FAS Billet Bearing Plate, CFM 105mm TB, JLT CAI, JLT Oil Seperators, TBA Boost Ref Adptr - Tuning: OST Dyno Engine 93/C16 & Trans via MPVI2 Hp Tuners - Exhaust: JBA Catless Downpipes, Trackhawk Exhaust Tips - Drivetrain: 3.09 Rear Diff, DIRS & Race Brace, 1pc DSS Aluminum DS, BMR Modded Safety Loop, Petty Trans Brace - Suspension: Eibach Pro-kit Springs, Eibach Front Upper Adj Arms, BMR Rear Lwr Arms, BMR Subframe Connectors, Speedlogix Front Strut Brace, Petty Ent Rear 4pt Shock Tower Brace, Bwoody F/R Sway Bar Links, Short rears - Wheels/Tires: 10.5 Replicas, 305 Nitto 555R Drag, Black Lug Nuts, Blackout Center Caps - Exterior: Perf Wing, ZL1 Splitter/Rear Diffusr/Side Skirts/Rear Ext, Redeye Emblems, Blackout Front/Rear Emblems, AMD Fuel Door, Fastys LED Tubes, Tint, Oracle Markers

Reply

Save

Like

Reactions: 1

GreenMachine15

· #11 · Mar 3, 2022

Spartacus said:
Maybe not, I believe you.

I haven't looked at the wheel wells in my car that close.

Would be cool if I could stuff 315's in the back (2016 HC Challenger NB).
I was thinking 20x10.5 or 20x11 new rims, but that's probably a bit much.
May just go with a 305 tire on a 20x11 rim.

Very nice setup on your car.

Did you have to change brakes in the back to run the 17's?

What 17" rim is that?

What are you running in the front, stock 20's?

Hi,

Thanks!

Stock brakes, but shorter bwoody greasable sway bar end links.

Forgestar F14 beadlock 17x10.

Stock 20s on the street, 18x5 f14 front skinnies for strip.

The rear has nothing to roll or you would be rolling the exterior 1/4 panel and cracking the paint. This is the widest you can fit with some minor modifications.

Take care

See less See more

2015 Hellcat Challenger A8 Sublime. Engine: 2.85 Metco, 10%OD ATI, Metco Idlers, hpindy 15% UD acc crank pulley, TBA Lwr Idler, FI SC Spacers, 180 Thermo, 1050X Injectors, FAS Ported Snout, FAS Billet Bearing Plate, CFM 105mm TB, JLT CAI, JLT Oil Seperators, TBA Boost Ref Adptr - Tuning: OST Dyno Engine 93/C16 & Trans via MPVI2 Hp Tuners - Exhaust: JBA Catless Downpipes, Trackhawk Exhaust Tips - Drivetrain: 3.09 Rear Diff, DIRS & Race Brace, 1pc DSS Aluminum DS, BMR Modded Safety Loop, Petty Trans Brace - Suspension: Eibach Pro-kit Springs, Eibach Front Upper Adj Arms, BMR Rear Lwr Arms, BMR Subframe Connectors, Speedlogix Front Strut Brace, Petty Ent Rear 4pt Shock Tower Brace, Bwoody F/R Sway Bar Links, Short rears - Wheels/Tires: 10.5 Replicas, 305 Nitto 555R Drag, Black Lug Nuts, Blackout Center Caps - Exterior: Perf Wing, ZL1 Splitter/Rear Diffusr/Side Skirts/Rear Ext, Redeye Emblems, Blackout Front/Rear Emblems, AMD Fuel Door, Fastys LED Tubes, Tint, Oracle Markers

Reply

Save

Like

Top Contributors this Month