SRT Hellcat Forum banner
  • Hey Everyone! Enter your ride HERE to be a part of this months Ride of the Month Challenge!
1 - 20 of 32 Posts

·
Registered
Challenger SRT Hellcat
Joined
·
913 Posts
Discussion Starter · #1 ·
I am trying to figure out if my radar detector mount (blend mount) will fit the rear view mirror post. Would one of you that have your car be kind enough to take a picture of the rear view mirror from the side so I can see the mirror mount style? I am going to need the radar detector functional immediately. Thanks in advance.
 
  • Like
Reactions: 630

·
Registered
Challenger SRT Hellcat
Joined
·
913 Posts
Discussion Starter · #3 ·
Thanks
 

·
Registered
Challenger SRT Hellcat
Joined
·
913 Posts
Discussion Starter · #4 ·
One more question if you don't mind. Your pic looks like it has a round post the mirror attaches to similar to the one in the link below. Can you confirm? Thanks in advance.

BlendMount Radar Detector Mount Dodge
 

·
Premium Member
Joined
·
12,594 Posts
One more question if you don't mind. Your pic looks like it has a round post the mirror attaches to similar to the one in the link below. Can you confirm? Thanks in advance.

BlendMount Radar Detector Mount Dodge
I will let someone else answer also, but I think it will work. There is very little clearance between the mirror and the base, but it looks like about a quarter of an inch is available on mine.;)
 

·
Registered
Challenger SRT Hellcat
Joined
·
913 Posts
Discussion Starter · #6 ·
Thanks Tammie. I have blend mounts on all my cars. They don't need much room to mount. 1/4" would be enough as long as you can still adjust the mirror. It's a must have accessory for me if I want to keep my license! :)
 

·
Premium Member
Joined
·
12,594 Posts
Thanks Tammie. I have blend mounts on all my cars. They don't need much room to mount. 1/4" would be enough as long as you can still adjust the mirror. It's a must have accessory for me if I want to keep my license! :)
ME TOO! I was at Car Toys yesterday scoping them out! ;)
 

·
Registered
Challenger SRT Hellcat
Joined
·
913 Posts
Discussion Starter · #9 ·
Perfect, thanks. The blend mount should work fine.
 

·
Registered
Challenger SRT Hellcat
Joined
·
913 Posts
Discussion Starter · #11 · (Edited)
I have the Passport 9500ix. I will either hardwire the car with an escort smartcord or tap into the mirror power. The smart cord has control advantages.
 

·
Premium Member
Joined
·
12,594 Posts
I have the Passport 9500ix. I will either hardware the car with an escort smartcord or tap into the mirror power. The smart cord has control advantages.
I am definitely leaning toward a hard wire and install so it blends in to dash. I haven't decided yet, there are a lot of options. Some very expensive...
 

·
Registered
Challenger SRT Hellcat
Joined
·
913 Posts
Discussion Starter · #13 ·
One ticket at 100mph will cover the cost!
 

·
Premium Member
Joined
·
12,594 Posts
One ticket at 100mph will cover the cost!
Holy shizzy! You think the ticket will be $1,500? I better stop speeding....lol...that's not gonna happen...I can't even drive 1/4 mile to the gym at the speed limit!...I am at least 20 over at all times, except in school zones or where there are pedestrians. :)
 

·
Registered
Challenger SRT Hellcat
Joined
·
913 Posts
Discussion Starter · #15 ·
Passport 9500ix - $500.00 on Amazon
Passport smartcord - $30.00 on Amazon
Blend mount - $80.00 on Amazon

$610.00 + installation if you don't do it yourself. Any car stereo shop worth a darn can install in an hour.
 

·
Premium Member
Joined
·
12,594 Posts
Passport 9500ix - $500.00 on Amazon
Passport smartcord - $30.00 on Amazon
Blend mount - $80.00 on Amazon

$610.00 + installation if you don't do it yourself. Any car stereo shop worth a darn can install in an hour.
Is it hard wired in to car? I want something that looks nice and doesn't just stick out somewhere. I know, I am fussy...sorry.o_O
 

·
Registered
Challenger SRT Hellcat
Joined
·
913 Posts
Discussion Starter · #17 ·
Yes, hardwired into the car. I don't have a picture hosting site setup. I could email you pics of the install on my Caliber SRT.
 
1 - 20 of 32 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top