SRT Hellcat Forum banner
  • Hey Everyone! Enter your ride HERE to be a part of this months Ride of the Month Challenge!
1 - 14 of 14 Posts

·
Registered
Charger SRT Hellcat
Joined
·
508 Posts
Discussion Starter · #1 · (Edited)
Hey guys. Been trying to sell my kong performance ported blower. I got my magnuson coming in next week and would like this one gone. I'm located near st augustine Florida. I can provide instal at my shop if local. If prices are too high feel free to shoot me an offer. I'm willing to take a trade for a stock supercharger plus cash as well. Blower has less than 5000 miles since install. Injectors were sent to id for cleaning few months back and also have 5000 miles since cleaning. Here is a list of the items

Kong ported blower with ceramic race bearings upgrade, snout ported to 108mm, powder coated top and snout, interchiller thermal spacers and blanket and bolts, griptec hub with 2.60 pulley......5000

Gearheadfabrications adjustable idler pulley.....300

Fore innovations fuel rails and cross over lines.... 500

Billet technology bypass cover ......100

Billet technology dual catch cans ....250

Id 1300cc injectors .....1300

Fore innovations twin pump with 295 pump upgrade and harness ....1000

2 sets of demon injectors, 300 each set

2 sets of stock fuel rails, 150 each

1 oem hellcat throttle body, 150

2 oem hellcat crank balancer 100





Motor vehicle Hood Automotive design Vehicle Car
Motor vehicle Gas Rim Machine Auto part
 

Attachments

·
Registered
2016 Bright White Challenger
Joined
·
1,549 Posts
Isnt the Whipple 3.0 5800.00? Is this the 2.4 or 2.7? I mean people asking 5 to $8,000 for a used factory blower I get it to an extent but common sense is if someone's going to drop that kind of coin why not get something more efficient that will have better gains.
Some (not all) that wanna race and leave others thinking their car is stock would buy a ported stock blower. May seem like a bad investment given your point above but if done right, can hustle some people out of some coin.

That is, if the blower wasn't gloss black and the engine bay didn't look like someone threw weekly paychecks into it.

Or

Could be trying to maintain a warranty and without dodge knowing its ported (Doubt they'd ever crack the snout off if they heard a bad bearing noise or something). Idk just guesses at this point. Its pretty, goodluck with sale OP someone will snag it.
 

·
Registered
Challenger SRT Hellcat
Joined
·
2,516 Posts
Hey guys. Been trying to sell my kong performance ported blower. I got my magnuson coming in next week and would like this one gone. I'm located near st augustine Florida. I can provide instal at my shop if local. If prices are too high feel free to shoot me an offer. I'm willing to take a trade for a stock supercharger plus cash as well. Blower has less than 5000 miles since install. Injectors were sent to id for cleaning few months back and also have 5000 miles since cleaning. Here is a list of the items

Kong ported blower with ceramic race bearings upgrade, snout ported to 108mm, powder coated top and snout, interchiller thermal spacers and blanket and bolts, griptec hub with 2.60 pulley......5000

Gearheadfabrications adjustable idler pulley.....300

Fore innovations fuel rails and cross over lines.... 500

Billet technology bypass cover ......100

Billet technology dual catch cans ....250

Id 1300cc injectors .....1300

Fore innovations twin pump with 295 pump upgrade and harness ....1000

2 sets of demon injectors, 300 each set

2 sets of stock fuel rails, 150 each

1 oem hellcat throttle body, 150

2 oem hellcat crank balancer 100





View attachment 583260 View attachment 583261
What bearing plate is on this?
 

·
Registered
Charger SRT Hellcat
Joined
·
508 Posts
Discussion Starter · #8 ·
Isnt the Whipple 3.0 5800.00? Is this the 2.4 or 2.7? I mean people asking 5 to $8,000 for a used factory blower I get it to an extent but common sense is if someone's going to drop that kind of coin why not get something more efficient that will have better gains.
The 3.0 whipple is 7300 and that's if you can get one any time soon. I was just going off prices I've seen on online for a stock replacement plus added what I paid for the porting. Plus I was including a bunch of things with it. I didn't think it was that bad of a deal. I'm also very flexible on the price.

 

·
Registered
Too many to list
Joined
·
6,526 Posts
I ended up selling my Jokerz 2.4L ported blower for $3k. You might get a little more for it, but it wasn't easy to sell at that price.
 
  • Like
Reactions: Kru510 and ScLeCo

·
Registered
Too many to list
Joined
·
6,526 Posts
How would 4.5k including the interchiller spacers, pulley, fore fuel rails, adj idler and demon injectors sound. anyone????
That's a reasonable price for someone that needs the whole setup.
 
1 - 14 of 14 Posts
Top