my Race built blower from FAS Motorsports will be here this week,
I ordered the top lid in white. It won’t be here until Friday but the pics look great.
I will post pics when it gets here
No that’s a factory lid. Just powder coated
I think it was 150.00
the snout and blower section are all polished, ported with ceramic bearings and clearanced.
No that’s a factory lid. Just powder coated
I think it was 150.00
the snout and blower section are all polished, ported with ceramic bearings and clearanced.
Chris, I had the same problem with the sticky stuff and rubbed some finish off.
I used a high heat paint and it actually turned out good.
Pulling that lid off isn’t hard, but, you have a sensitive paper gasket and all the bolts have a torque pattern.
You might try the high heat paint first. If you don’t like the outcome, pull it.
