SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

Race Star wheels and tires

2962 Views 18 Replies 3 Participants Last post by  Bob H
I recently sold my 2018 Challenger HC and went back to stock before I sold. Purchased a 2019 Redeye wide body and as result I am selling my wheels and tires.

Local pickup in central Florida.

2x-Race Star 20 x 6 with bridgestone 195/50R 20
2x- Race Star 20 x 9 with Mickey Thompson Street Comps 275/40R 20
2x- Race Star 17 x 9 1/2 Mickey Thompson ET Street SS 305/45R17

All 6 wheels have been powder coated dark metallic gray with metallic flakes
All have TPMS valve stems, lugs and hub centric adapters included.
Used the 20 x 9 and 20 x 6 for street driving and then swapped out the rear to the 17 x9 1/2 for drag strip.
10 passes on the ET Streets and about 10k miles on the the street tires, all are in good shape and plenty of life left in them. Total cost for everything including powder coating was $5,200.
Asking $2,250 for all six.
Please disregard discussion about the drive shaft and Tazer, had them on this post but sold them already, this post is for the wheels and tires.

577672
576469
577667
577668
577669
577670
577671
See less See more
7
1 - 3 of 19 Posts
Quick question Bob, not that I need the ds but I’m interested in the loop if no one else wants it. I’ll assume its for an A8 as I still have not found one for an M6 with a 4 in shaft. Thanks.
A8 Bob, or M6?
Thanks Bob, but I'm out on that as I drive an M6. GLWS.
1 - 3 of 19 Posts
Top