SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!
1 - 20 of 20 Posts

· Registered
Challenger SRT Hellcat
Joined
·
492 Posts
Rock auto and Summit has the OE Hellcat front rotors for much cheaper then what the friggin dealerships are charging them for. I was looking for a set of front rotors as well and found them for around $1,412. By the way I'm enjoying the Florida Beach since I live in Florida as well. ;)
 

· Registered
Charger SRT Hellcat
Joined
·
678 Posts
$400 a ring, direct replacement.

$300 a ring:
 

· Registered
Charger SRT Hellcat
Joined
·
1,561 Posts

· Premium Member
Joined
·
752 Posts
Rock auto and Summit has the OE Hellcat front rotors for much cheaper then what the friggin dealerships are charging them for. I was looking for a set of front rotors as well and found them for around $1,412. By the way I'm enjoying the Florida Beach since I live in Florida as well. ;)
Florida living...............me too:cool:
 

· Registered
'23 Redeye Jailbreak
Joined
·
4,887 Posts
Please. Anybody have any recommendations for front rotors on a 18 HC WB ??? The dealer is outside their mind at $3400….any info would help. Thanks
Is that the price for just the rotors or is that the out the door price on a 4 brake job with parts and labor, bleeding the lines and so on?
 

· Registered
2015 Charger SRT Hellcat
Joined
·
905 Posts
Put my DBA T3 5000 rings on with new hat hardware from.KNS BRAKES. Each was 320 dollars per ring and was shipped in two days
Tire Wheel Automotive tire Locking hubs Synthetic rubber
 
  • Like
Reactions: GR8YTE

· Registered
Challenger SRT Hellcat
Joined
·
1,998 Posts
Rings for factory hats:
  • powerstop
  • DBA , also speedlogix has them
  • KNS (girodisc--but not the same as the Demon Performance girodisc rings)
  • Baer

Replacement 2-piece rotors
  • DBA
  • Centric 126.63088
  • Demon Performance (girodisc) (rebuildable), available from several vendors (speedlogix, solis, bwoody, mmx, others)
  • EBC

Replacement 1-piece rotors
- Centric 226.63088
 

· Registered
Challenger SRT 426
Joined
·
2,354 Posts
I second the DBA rings. Easy to do yourself. Just a little tedious properly torquing all the new nuts is all. They’re also non-directional so you can’t screw up which side you put them on :p
Wheel Vehicle Locking hubs Automotive lighting Automotive tire
 

· Registered
2016 Challenger HC Pitch Black, AFE intake, Magnaflow Catback exhaust, no other performance mods.
Joined
·
15 Posts
Hello, I installed Power Stop Z26 kit # CH4660 from American Muscle back in March 2022 on my 2016 Challenger HC. The kit had everything including hardware. Huge difference in stopping power after break-in. Original brake's were great, but these Power Stop brakes are “amazingly” better IMO. Just under $1500 for pads and rotors all around.
Tire Wheel Automotive tire Locking hubs Motor vehicle

Photograph Product Font Eyelash Circle
 

· Premium Member
Joined
·
1,628 Posts
These were less than $800 for my 15' Charger on Amazon, fine for daily but would want 2 or 3 pc for tracking as I was told the temperature differential can warp the rotors when running at high speeds. That is, the face expands and contracts at a different rate than the hub which may cause failure. Sounds like it might be right, not sure.

Automotive lighting Automotive tire Font Automotive fog light Circle
 
1 - 20 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top