SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

"Service Active Dampening System" - how to diagnosis?

8279 Views 9 Replies 6 Participants Last post by  Kelly_AM
The Service Active Dampening System message popped up on my dash (2015 Hellcat Challenger). I'm done the reading and tried these suggestions
  • Looked for broken or rubbed through wiring. (Didn’t find any and the tires are stock size)
  • Looked for leaking shocks. Didn’t see any.
  • Check fuse 48, it's good (bugger is hiding in the trunk)
  • disconnected the battery for an hour and reconnected.
  • Checked for DTC using the dash menu – nothing listed. Same for a basic scan tool.
Can anyone point me in a direction? Are there any cheap scan tools to will read the Active Damping system codes?

Thanks!
1 - 1 of 10 Posts
Open trunk. Remove enough plastic push pins to peel back right panel and you'll see it.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top