SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

Spare Tire Fitment Question.

2238 Views 17 Replies 9 Participants Last post by  Slidd
Will this emergency spare fit any Hellcat with 4 piston calipers ?

Spare Wheel 17" w/ Tire T135/90D17 2.91/32 2017 2018 2019 Dodge Charger SXT

Thank you !
1 - 3 of 18 Posts
So totally off topic, but since they are releasing a spare tire specifically for the 2021's with the bigger brakes, I wonder if the wheels alone could be used as front runners in conjunction with a pair of race skinnies as a stop gap to there not being any specific drag skinnies for the 2021 cars with 6 pot brakes.

The M&H front drag tires are 28x4.5-18's (165/85-18) and have a recommended wheel with of 4"
The spare wheel is 4" in width. The limiting factor is that it looks like you need to run the supplied spacer to install the wheels on the front.
The wheel and tire is under $350 and an M&H drag skinny is is about $260 a pop, so for about $1200 and change there might be a viable front wheel setup.
Who’s releasing this spare tire? And where can I buy one?
Modern Spare says some time in 2022 they will release a 6-piston 19" spare.

Sent from my SM-N960U using Tapatalk
But do I need it, Slidd? Or will the original 18” spare fit over the WB brakes? I can always do a dual swap if I have to right? I just asked about this on a super old thread over on the other forums too.
And how the hell is a 19 inch wheel going to fit in the trunk? I remember the 18 being a tight sweet when I installed it in my SP.
1 - 3 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top