SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

Spare Tire Fitment Question.

2296 Views 17 Replies 9 Participants Last post by  Slidd
Will this emergency spare fit any Hellcat with 4 piston calipers ?

Spare Wheel 17" w/ Tire T135/90D17 2.91/32 2017 2018 2019 Dodge Charger SXT

Thank you !
1 - 1 of 18 Posts
So totally off topic, but since they are releasing a spare tire specifically for the 2021's with the bigger brakes, I wonder if the wheels alone could be used as front runners in conjunction with a pair of race skinnies as a stop gap to there not being any specific drag skinnies for the 2021 cars with 6 pot brakes.

The M&H front drag tires are 28x4.5-18's (165/85-18) and have a recommended wheel with of 4"
The spare wheel is 4" in width. The limiting factor is that it looks like you need to run the supplied spacer to install the wheels on the front.
The wheel and tire is under $350 and an M&H drag skinny is is about $260 a pop, so for about $1200 and change there might be a viable front wheel setup.
1 - 1 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top