SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

Supercharger bearings

1862 Views 6 Replies 5 Participants Last post by  Himmelkat
when installing a fixed 2.85 upper how long do the bearings last before they start to get noisy and need to be replaced with high speed bearings? From what I've read people have had problems with the oem bearings and also others not have any issues at all. Im going to be taking the supercharger off anyways so I figured id just upgrade the bearings now so I don't have to deal with them in the future or should I just run it and see?
1 - 1 of 7 Posts
might just run the oems then and see how it goes worst case I send the supercharger out. :unsure:
Have to mention you are worried about the supercharger bearings from adding an overdrive pulley. This is a valid concern. But you express no concern for any of the engine internals from the risk they run from being exposed to more HP.

If you think the supercharger bearings need upgrading what about the engine internals?
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.