SRT Hellcat Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
231 Posts
Discussion Starter #1
I have a 2016 Challenger Hellcat I'm wanting to add the T/A hood scoop, under the
hood piece.

in the first pic combined1.jpg, it looks like I'd have to trim my lower box height down, like
along the red lines, for the top part to fit.
Where the yellow/orange arrows are, I'm afraid this would hit my super charger
see combined4.jpg, and the hood not close?

Pic: Under_the_TA_hood.jpg show a T/A and
Pic: MY_JLT.jpg show the hellcat
as they are normally.

The clearance between hood and top of super charger is a little under 2 inches with
hood closed, also, the fact I'd no longer have air flow across the super chargers top,
not sure how important that is.
 

Attachments

·
Registered
Joined
·
578 Posts
I have heard it will not clear the blower.
 

·
Registered
Joined
·
185 Posts
I have been interested in doing the same thing, but figured it would not lineup or have enough clearance. Thanks for the pics for comparing though.
 
1 - 4 of 4 Posts
Top