SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

Time to mod finally...going E85 and need advice!

5709 Views 19 Replies 11 Participants Last post by  b00sted
Hey all,

I know this has probably been discussed hundreds of times...tried the search function and didn't find a good summary of info on it.

So I want to convert to E85 with full supporting mods but maintain a safe reserved tune. Don't want to be blowing anything up.

I don't really have a HP goal in mind...just convert to E85 and see where I end up.

So with that said here are some questions.

I'll probably go to Tim Barth for tuning, seems he's the most reliable person out there for remote and safe tunes and the most popular for a reason. Or am I wrong on that?

Parts list:
What pulley will I need? Suggestions?
Bigger injectors of course. What will I need?
Boost a pump or dual fuel pump setup?
Cracked PCM of course for tuning. Best source for that? I'll also need a hand held or mounted tuning device obviously, best one out there?

I think that covers it for parts? Pulley/PCM/Tune/tuning device/Injectors/Fuel Pump

Am I missing anything?

And finally I'd LOVE to have a flex fuel tune. I read a while back tuners where working on that but not sure if one's available or functional yet or not? In the event I can't find E85 anywhere it'd be nice to run it super low and fill up on premium and have the PCM do the rest of the work. Ran into this issue on my last car...Dad was driving it and couldn't find E85 so filled up on premium gas...shortly after the rod went through the engine block and out of the oil pan....ugh. lol Of course the hand held Diablo tuner was in the trunk and could have flashed the premium gas tune to it beforehand but he didn't know. lol
  • Like
Reactions: 1
1 - 2 of 20 Posts
FIC 1200cc injectors will be what you need! I am an authorized dealer for them so send me a DM when you want to purchase

Sent from my iPhone using Tapatalk
  • Like
Reactions: 3
I am getting rid of my Charger Hellcat and have some parts for sale that will suit your build. See the list below!

ARH catless mid pipes (new)
Griptec coated Litens 2.85” pulley kit (new)
FI blower spacer/blanket kit (new)
HPTuners 2018+ Smart Access Cable (new)
crank pin kit with 2 pins and Demon crank bolt (new)
Denso IKH22 spark plugs (new, one step colder than factory, equivalent to NGK LFR7AIX)
spare 2018-2019 PCM for Hellcat/Redeye/Trackhawk A8 trans (used)
ID1050X injectors (used for approx 5000-6000mi)
P4D DIRS brace (used for 47 days, 1286mi)

I will take $3000 shipped for everything! Can ship it out today or tomorrow if payment is done today!

Sent from my iPhone using Tapatalk
See less See more
1 - 2 of 20 Posts