Should be a 3.00" I.D. inlet, running into the dual tips at 2.50" - 3.00" ID, approximately 5.000" L
Should be a 3.00" I.D. inlet, running into the dual tips at 2.50" - 3.00" ID, approximately 5.000" LJust curious what is the diameter of the tips?
Maybe OP has a set of calipers around and could measure, they look nearly same as the inlet size if not slightly bigger as you stated.I know the inlet is 3" I'm talking about the size of the 4 tips. I heard they were like 3 3/4" each but wanted to confirm.