SRT Hellcat Forum banner

1 - 6 of 6 Posts

·
Registered
Charger SRT Hellcat
Joined
·
2 Posts
Discussion Starter #1
I just purchased new brakes and rotors for my 2017 hellcat charger. I want to take the two piece rotor apart and paint the inner rotor but I do not know the torque specs (if there are any?) for when I put it all back together. Does anyone have any idea what the specs would be? Thanks
 

·
Premium Member
Challenger SRT Hellcat
Joined
·
12,292 Posts
I just purchased new brakes and rotors for my 2017 hellcat charger. I want to take the two piece rotor apart and paint the inner rotor but I do not know the torque specs (if there are any?) for when I put it all back together. Does anyone have any idea what the specs would be? Thanks


I know that it's somewhere here on the boards (probably more than once...) Trying including "rotor click" in your searches....


Welcome to the forums... ;)
 

·
Registered
Challenger SRT 426
Joined
·
1,670 Posts
DBA spec. for rings to hats is 13 Nm or 10 ft. lbs. or 120 inch lbs. I used an inch lb. torgue wrench on mine. Little more precise than using a ft. lb. bar IMO. Don't forget a little blue Loctite. There is also a bolting pattern to adhere to. I think I can find and post that if interested.
 
1 - 6 of 6 Posts
Top