[Coldheartid]

To cover those ugly factory warning stickers on the visors. Billet Tech made these for me.

 

[FLEX]

Those are nice. I have a set on my 2010 but the CDN sticker on my 2015 is a LOT longer so they won't work. Not happy about that.

 

[goingsolo2]

Those are awesome...how do they install? I'm guessing from the screws that there is a backing plate?

 

[Fiveinch]

I could dig a set of SRT plates to cover those darn decals...

 

[Coldheartid]

Those are awesome...how do they install? I'm guessing from the screws that there is a backing plate?

No backing plate, just don't over tighten the 4 screws.

 

[goingsolo2]

No backing plate, just don't over tighten the 4 screws.

What does it screw into? Is there something behind the fabric?

 

[MaxxMuscle]

How much if u don't mind me asking ?

 

[gts_2001]

The plates look good. I'm not sure about the placement. To me, they seem like something to slice your face / forehead / scalp open with in a panic stop, or God forbid, a front end collision. Worst case scenario, loss of an eye or eyes. Car makers got rid of all of the sharp / metallic stuff in front of / above us and replaced it with soft / padded stuff for a reason.

 

[392]

I always liked them, but don't like the idea of screwing into the visor. but thats just me...

 

[392]

oops, didn't realize how old this thread was...

 

[jroyk]

The plates look good. I'm not sure about the placement. To me, they seem like something to slice your face / forehead / scalp open with in a panic stop, or God forbid, a front end collision. Worst case scenario, loss of an eye or eyes. Car makers got rid of all of the sharp / metallic stuff in front of / above us and replaced it with soft / padded stuff for a reason.

Agree. How about a nice sticker?

 

[392]

stickers would be better I think...I asked BT awhile back if they could make them without holes & just double stick them...they said they may be too heavy...

 

[B5 MOPAR]

BT doesn't have their licensing agreement anymore with Mopar. Lost it awhile ago. They could probably do the SRT letters but they won't be able to do the Cat head.

 

[jroyk]

I was thinking of a sticker that wasn't metal. Maybe something that looked embroidered or actually was. Obviously, not a job for BT.

 

[yellaheep]

Those labels will peel off using the hot setting on a hair dryer and a little time to peel them.

Or you can cover them with something humorous........

 

[Mike02z]

I have used the below in other cars. If you get the right match they are fairly invisible. I have a sample somewhere to verify the color.

Home

 

[Jefe]

Stickers: 2015 2016 Dodge Hellcat Sunvisor Warning Label Cover with Hellcat Logo PM014