SRT Hellcat Forum banner
  • Hey Everyone! Vote for the Site Favourite HOTM winner for the year of 2022 HERE!

Water pump replacement

6851 Views 18 Replies 6 Participants Last post by  WizzaVTX
2
Started on this project yesterday evening.

Have all but one bolt removed and transfered to new pump including pulling needing swap.
Tire Automotive tire Product Wheel Vehicle

Last bolt is unable to be removed due to washer not getting past lip of pulley on far right edge of the water pump.
Automotive tire Hood Tire Automotive lighting Motor vehicle

Am thinking the part is the ac compressor and am still researching. I can see two bolts on bottom and left side of it but would rather not mess with it if there is another way to get past and then replace with the new pump.

Do not want to damage either the pulley or the bolt/washer.

For those with experience doing this, what suggestions can you offer?
See less See more
  • Like
Reactions: 1
1 - 1 of 19 Posts
Started on this project yesterday evening.

Have all but one bolt removed and transfered to new pump including pulling needing swap.
View attachment 581332
Last bolt is unable to be removed due to washer not getting past lip of pulley on far right edge of the water pump.
View attachment 581333
Am thinking the part is the ac compressor and am still researching. I can see two bolts on bottom and left side of it but would rather not mess with it if there is another way to get past and then replace with the new pump.

Do not want to damage either the pulley or the bolt/washer.

For those with experience doing this, what suggestions can you offer?
Do water pumps go bad easily in hellcats especially 6 years or older ??
1 - 1 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top