[b00sted]

I can confirm as Im sure most already have, but you can fit this setup on a NB Charger. No spacers.

I simply pealed back the fender liner, flattened the ribs out as much as I could

Sanded down the rough spots after hammering

Sprayed it all with rustoleum primer

Grabbed a heatgun and heated the fender liner... This allowed me to stretch it a bit and flatten out the high spots.

After all of this, my MT 315/50/17s fit just fine.

 

[baabootoo]

Nice work, I just let friction even mine out!

 

[b00sted]

Nice work, I just let friction even mine out! View attachment 581161

LOL! That spot right there, required the most hammering lol

 

[nate-roth]

I can confirm as Im sure most already have, but you can fit this setup on a NB Charger. No spacers.

I simply pealed back the fender liner, flattened the ribs out as much as I could

Sanded down the rough spots after hammering

Sprayed it all with rustoleum primer

Grabbed a heatgun and heated the fender liner... This allowed me to stretch it a bit and flatten out the high spots.

After all of this, my MT 315/50/17s fit just fine.

View attachment 581160

Thanks for the info on these. Ive been thinking about a Weld Ventura (non-beadlock) drag pack, good to see them come out with a more moderately priced line of wheels.

 

[b00sted]

Thanks for the info on these. Ive been thinking about a Weld Ventura (non-beadlock) drag pack, good to see them come out with a more moderately priced line of wheels.

I went beadlock. I was tired of spinning the wheel in the tire.

 

[socortes]

Same thing I did for my 316/60/15.

Sent from my SM-G998U using Tapatalk