Go with a 10.5” wise wheel min for a 305 tire.

R.K.

 

I am going to go with Nitto 305 on the back but am looking into using replica wheels 20x10
( I know they will fit the stock wheels ). I DO NOT drag race my car on the strip . I do like doing pulls on the high way and once in a wile light to light . I am basically looking to get more grip when I am already moving .
1, who makes the best replica wheels ?
2, dose anyone make forged replica wheels ?
3, do I have to worry if I do not use a forged wheel ?
4 , has anyone found any drew back to using a 20x10 replica wheels?
5, do I need to worry about my stock drive shaft ?

I just put Factory Reproduction replicas on my rears with 20x10.5, 305/35/. No drawback as of yet for me. I changed my drive shaft for peace of mind but most say the stock shaft is breaking at the track. Mine has lowering springs to reduce the wheel gap and the color match seems identical with the bronze/Brass Monkey.

Sent from my iPhone using Tapatalk

 

Are you running stock tires in the front ?

 

I just put Factory Reproduction replicas on my rears with 20x10.5, 305/35/. No drawback as of yet for me. I changed my drive shaft for peace of mind but most say the stock shaft is breaking at the track. Mine has lowering springs to reduce the wheel gap and the color match seems identical with the bronze/Brass Monkey.

Sent from my iPhone using Tapatalk

Beautiful cat. what is the offset on your 10.5's? mine is 25mm and with lowering springs (Eibach) I need spacers to not rub the (fwd) inner wheel well.

 

Thanks!!

I ordered from Performance Plus Tire, Factory Reproduction wheels. Mine are 25mm as well. Did you do a 4 wheel alignment? My installer did say they rubbed slightly but after alignment it was fine and no rub.

Sent from my iPhone using Tapatalk

 

no rub. could barely get a piece of paper between though

 

That is strange!?! I’m not sure why some do some don’t.


Sent from my iPhone using Tapatalk

 

Are these ebay replicas any good or junk? Just looking for a winter set
20 x9 inch 2017 HELLCAT Dodge Charger SRT OE replica 2528 matte black rims 5x115 757558454259 | eBay

 

Be careful of eBay wheels, but these look legit for what you want them for. 30 day return but you pay shipping unfortunately.


Sent from my iPhone using Tapatalk

 

I wanted bronze wheels when I bought my Green Go 2017 Challenger. But the Brass Monkeys were not 5 spoke, so I passed.
But there was a recent group buy on this site, and I got the bronze color in a 5 spoke. 11" rears and 10.5" fronts.
315/35 NT05's for the rear, and hopefully 305/35 555R's on the front. Should have these installed late this month.

 

I wanted bronze wheels when I bought my Green Go 2017 Challenger. But the Brass Monkeys were not 5 spoke, so I passed.
But there was a recent group buy on this site, and I got the bronze color in a 5 spoke. 11" rears and 10.5" fronts.
315/35 NT05's for the rear, and hopefully 305/35 555R's on the front. Should have these installed late this month.

View attachment 463211

Who sells replica 5 spokes? All I see are the other style

 

i just got my Brass monkeys from factoryreproductions.com - they are a 99 percent match and got 10 inch wide for my 305's and they fit but rubbed at spots on the inner plastic tub-- drove for few miles and cut out the rubbing sections-- all good.

 

Talk to Paul at PK. He's in the vendor area. The 5 spoke I have is model HR5.

http://www.hellcat.org/forums/pk-auto-design.113/

 

Talk to Paul at PK. He's in the vendor area. The 5 spoke I have is model HR5.

http://www.hellcat.org/forums/pk-auto-design.113/

Yea, $900 for 2 rims. Too steep for me. I just want them for a couple trips to the strip.

 

So people are having rubbing issues with 305's on Replica rims? I thought those were not suppose to rub? Now I am worried, I don't want to have to deal with that. I was ready to pull the trigger on some Voxx Replicas and go with Nitto 305's Ugh.....

 

The ones from Paul will not rub, since the offset is measured and double checked by him to ensure proper fitment. The Brass monkeys some seem to have rubbing issues.

 

Ive always heard the the replica wheels weighed a lot more than oem. Curious on if this is true or not.

 

After a 4 wheel alignment mine didn’t rub with FR 10.5 wheels.


Sent from my iPhone using Tapatalk

 

After a 4 wheel alignment mine didn’t rub with FR 10.5 wheels.


Sent from my iPhone using Tapatalk

So they rubbed before an Alignment?

 

Yes just a little.


Sent from my iPhone using Tapatalk

 

Factory reproduction wheels in Ontario CA Nice replicas